ZyXEL G-1000 v2 User’s Guide

CH A P T E R 7

System

Use this screen to configure the G-1000 v2’s time and date settings.

7.1 General Setup

7.1.1 General Setup and System Name

General Setup contains administrative and system-related information. System Name is for identification purposes. However, because some ISPs check this name you should enter your computer's "Computer Name".

•In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification tab, note the entry for the Computer Name field and enter it as the System Name.

•In Windows 2000, click Start, Settings, Control Panel and then double-click System. Click the Network Identification tab and then the Properties button. Note the entry for the Computer name field and enter it as the System Name.

•In Windows XP, click start, My Computer, View system information and then click the Computer Name tab. Note the entry in the Full computer name field and enter it as the G-1000 v2 System Name.

7.1.2General Setup

The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host name (System Name), the domain name can be assigned from the G-1000 v2 via DHCP.

Click Maintenance > System to open the General screen.

Chapter 7 System

75