ZyXEL G-1000 v2 User’s Guide

The following table describes the labels in this menu.

Table 21 MAC Address Filter

LABEL

DESCRIPTION

 

 

Active

Select the check box to enable MAC address filtering.

 

 

Filter Action

Define the filter action for the list of MAC addresses in the MAC Address table.

 

Select Deny to block access to the G-1000 v2, MAC addresses not listed will be

 

allowed to access the G-1000 v2

 

Select Allow to permit access to the G-1000 v2, MAC addresses not listed will be

 

denied access to the G-1000 v2.

Set

This is the index number of the MAC address.

MAC Address

Enter the MAC addresses of the wireless station that are allowed or denied access to

 

the G-1000 v2 in these address fields. Enter the MAC addresses in a valid MAC

 

address format, that is, six hexadecimal character pairs, for example,

 

12:34:56:78:9a:bc.

Apply

Click Apply to save your changes back to the G-1000 v2.

 

 

Reset

Click Reset to reload the previous configuration for this screen.

 

 

4.6 Wireless LAN Advanced Setup

To configure advanced wireless settings, click Network > Wireless LAN > Advanced. The screen appears as shown.

Figure 21 Wireless LAN: Advanced

Chapter 4 Wireless LAN

61