Assembly, Connecting battery, See | RIDGID RD80011, RD8000 specification

assembly

Raise the handle end of the generator high enough to gain access to the frame bottom; securely position props underneath to support.

Insert an axle through the center of the wheel.

Place a washer on the axle, then slide the axle through the bracket on the frame.

Slide the hitch pin through the hole in the axle and make sure it is secure.

Repeat the process on the other side to install second wheel.

connecting battery

See Figure 7.

The battery cables must be connected before the electric start feature of the generator can be operated.

Connect the red wire to the positive (+) terminal first, then connect the black wire to the negative (−) terminal using the bolts, nuts, and washers provided. Make sure all connections are tight.

NOTE: Be careful not to short across the terminals when installing. Shorting the terminals together can cause sparks, damage to the battery or generator, or even burns or explosions.

Cover the terminals with the rubber covers.

When removing the battery for replacement: remove the nut and bolt first from the negative (black) post, then from the positive (red) post, being careful not to short across the terminals. Always abide by the safety warnings provided with the battery. Remove the battery and dispose of according to local and state regulations.

WARNING:

To reduce the risk of electrocution or explosion, do not short circuit the battery terminals or charge in a sealed container. Keep sparks and flame away.

WARNING:

Keep metal objects away from the battery terminals. Metal objects can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.

REMOVABLE CONTROL PANEL

See Figure 8.

To detach the removable control panel from the generator:

Turn off the generator.

Loosen the latch on the removable control panel and pull the control panel forward.

Disconnect the twist-lock plug and the 12V engine control connector on the back of the control panel.

installing A WALL MOUNT FOR THE removable control panel

See Figure 9 - 10

The removable control panel can be removed from the generator and wall-mounted in another location before re- connecting it to the generator.

To wall-mount the removable control box:

Screws or nails for hanging the box should be spaced 4-1/4 in. from center to center.

Mark the 4-1/4 in. measurement on a wall stud or other sturdy wood surface.

Drill holes and insert the screws; tighten the screws securely into the wood. If using nails, the nail head should be large enough to hold the control panel securely.

NOTE: There should be at least 5/8 in. of the screw or nails protruding from the wood piece for hanging the box.

Hang the box on the screws or nails, making certain it is secure.

12 — English

RD80011, RD8000 specifications

The RIDGID RD8000 and RD80011 represent a significant advancement in the world of underground utility locating. These versatile tools are designed to help professionals accurately detect and trace buried utilities, ensuring safe and efficient excavation and construction processes.

Both models are equipped with advanced signal processing technologies that enhance their ability to locate utilities, even in challenging environments. The RD8000 is renowned for its range of frequencies—typically offering up to five different transmission frequencies, allowing users to locate a variety of utility types including electric, gas, water, and telecommunications lines. This frequency versatility means that users can effectively cater to a wide spectrum of application needs, from residential projects to large-scale infrastructure work.

The RD80011 variant enhances these capabilities with added features aimed at improving user experience and precision. One standout feature is the built-in GPS technology, which allows for real-time mapping and locating of utilities, providing users with the ability to track locations directly on their devices. This integration streamlines the process of recording and reporting utility locations, fostering efficient workflow and reducing the risk of errors in documentation.

Additionally, both models boast an ergonomic design, featuring a lightweight build and intuitive controls that make them user-friendly. The display screen is bright and easy to read, featuring visual indicators that help convey critical information at a glance. The RD8000 and RD80011 utilize a rechargeable battery that ensures long-lasting power, giving users the confidence to tackle extended projects without the need to frequently replace batteries.

Another valuable characteristic is the built-in earphone jack, allowing for enhanced audio feedback and communication in noisy environments. Users can listen for specific tones corresponding to different utilities, which can aid in pinpointing the location with greater accuracy.

These RIDGID models also include advanced interference suppression technologies to minimize signal distortion from other nearby utilities, ensuring users receive clear and accurate data. This feature is particularly vital in complex urban settings where multiple utilities coexist in close proximity.

In summary, both the RIDGID RD8000 and RD80011 are designed with professional utility locators in mind, integrating advanced technologies and features that enhance detection capabilities, improve ease of use, and contribute to safer excavation practices.