Troubleshooting, Problem Possible Cause Solution

troubleshooting

PROBLEM	POSSIBLE CAUSE		SOLUTION
Engine will not start.	The engine switch key is on OFF.	Turn the engine switch key to ON.
	No fuel.	Fill fuel tank.
	Lubricant level is low.	Check engine lubricant level and fill, if
		necessary .
	Fuel valve is off.	Turn fuel valve on.
	Spark plug faulty, fouled, or improperly	Replace spark plug.
	gapped.
	Choke lever is in RUN position.	Move choke lever to START position.
	Engine stored without treating or	Drain fuel and carburetor. Refuel with
	draining gasoline, or refueled with bad	fresh gasoline.
	gasoline.
	Dirty fuel filter.	Contact authorized service center.

Engine hard to start	Water in gasoline.	Drain entire system and refill with fresh
		fuel.
	Weak spark at spark plug.	Contact authorized service center.

Engine lacks power.	Dirty air filter.	Check air filter element. Clean or
		replace	as needed.
	Engine stored without treating or	Drain fuel and carburetor. Refuel with
	draining gasoline, or refueled with bad	fresh gasoline. If problem continues,
	gasoline.	contact your nearest authorized service
		center.
	Dirty air filter.	Clean or replace		as needed.

AC receptacle does not work.	Circuit breaker is off.	Turn ON the AC circuit breaker.
		Reset the GFCI.
	Item plugged in is defective.	Try a different item.

Generator makes a “spark knock” or	An occasional light “knocking” or “ping-	Switch to a different brand of gasoline,
“pinging” noise.	ing” under heavy load is not a cause	making sure that the octane rating
	for concern. However, if the knocking	is 86 or higher. If problem continues,
	or pinging occurs under normal load	contact your nearest authorized service
	at a steady engine speed, the problem	center.
	may be with the brand of gasoline being
	used.

If problem persists after trying the above solutions, contact your nearest authorized service center for assistance.

The following symptoms may indicate problems that will affect the emissions level of the unit:  Hard starting or stalling after starting

 Rough idle

 Misfiring or backfiring under load  Afterburning (backfiring)

 Black exhaust smoke or high fuel consumption

If you encounter any of these symptoms, have the unit inspected and repaired by the nearest authorized service

center .

20 — English

RD80011, RD8000 specifications

The RIDGID RD8000 and RD80011 represent a significant advancement in the world of underground utility locating. These versatile tools are designed to help professionals accurately detect and trace buried utilities, ensuring safe and efficient excavation and construction processes.

Both models are equipped with advanced signal processing technologies that enhance their ability to locate utilities, even in challenging environments. The RD8000 is renowned for its range of frequencies—typically offering up to five different transmission frequencies, allowing users to locate a variety of utility types including electric, gas, water, and telecommunications lines. This frequency versatility means that users can effectively cater to a wide spectrum of application needs, from residential projects to large-scale infrastructure work.

The RD80011 variant enhances these capabilities with added features aimed at improving user experience and precision. One standout feature is the built-in GPS technology, which allows for real-time mapping and locating of utilities, providing users with the ability to track locations directly on their devices. This integration streamlines the process of recording and reporting utility locations, fostering efficient workflow and reducing the risk of errors in documentation.

Additionally, both models boast an ergonomic design, featuring a lightweight build and intuitive controls that make them user-friendly. The display screen is bright and easy to read, featuring visual indicators that help convey critical information at a glance. The RD8000 and RD80011 utilize a rechargeable battery that ensures long-lasting power, giving users the confidence to tackle extended projects without the need to frequently replace batteries.

Another valuable characteristic is the built-in earphone jack, allowing for enhanced audio feedback and communication in noisy environments. Users can listen for specific tones corresponding to different utilities, which can aid in pinpointing the location with greater accuracy.

These RIDGID models also include advanced interference suppression technologies to minimize signal distortion from other nearby utilities, ensuring users receive clear and accurate data. This feature is particularly vital in complex urban settings where multiple utilities coexist in close proximity.

In summary, both the RIDGID RD8000 and RD80011 are designed with professional utility locators in mind, integrating advanced technologies and features that enhance detection capabilities, improve ease of use, and contribute to safer excavation practices.

troubleshooting

PROBLEM

POSSIBLE CAUSE

SOLUTION

RD80011, RD8000 specifications