POLE Saw Information
Pole Saw Assembly
RPS2N1
The hardware bag contains the following items:
•(1) Handle Bracket
•(1) Knob
•(1) .250" Lock Washer
Step ❶– Squeeze Trigger
1B | Squeeze and hold |
| trigger. |
1A Push in and hold trigger lockout button.
Step ❸ – Attach Handle Bracket to Pole Bracket
3A | Slide handle bracket onto |
| clamping bolt. |
3B Clamping bolt should extend through handle bracket.
Step ❹ – Secure Handle Bracket to Pole Bracket
ENGLISH
Step ❷ – Insert Pole Bracket into | 4A Place lockwasher onto | |
clamping bolt. | ||
| ||
Saw |
|
|
2A | Continue to hold trigger while | HTE |
| N | |
| completing step 2B. | IG |
|
| T |
2B Insert pole bracket into saw. Note: Pole Bracket holds trigger in “ON” position.
4B Thread knob onto clamping bolt. Note: After knob makes contact with handle bracket, tighten 1 1/2 to 2 more turns.
Step ❺– Connect to Power Cord
Plug saw power cord into receptacle cord at end of inner pole.
17 | www.desatech.com |