Remington Power Tools RPS2N1, 104317, PS1510A manual IMPORTANT Safety Information

Page 5

iMPORTANT SAFETY INFORMATION

9.Grip chain saw firmly with both hands. Never operate chain saw with one hand. Never use hand guard as handle.

10.Grip pole saw securely. Place one hand on the pole and the other on the handle.

11.Keep finger off trigger until ready to make cut.

12.Before starting chain saw, make sure chain is not touching anything.

13.To guard against electrical shock, avoid body contact with grounded objects such as pipes, fences, and metal posts.

14.Keep all parts of body away from chain when saw is running.

15.Do not force saw while cutting. Apply light pressure. It will do the job better and safer at the rate for which it was intended.

16.Do not cut small brush and saplings with the pole saw. Use the chain saw only, with extreme care. Slender matter may catch in the chain and be whipped toward you. This could also pull you off balance.

17.When cutting limb or tree trunk that is under tension, use extreme caution. Be alert for wood springing back. When wood tension is released, limb could spring back and strike operator causing severe injury or death.

18.Carry saw from one place to another

with saw stopped and unplugged

Chain saw - by holding front handle (never use hand guard as handle)

Pole saw - with telescoping pole returned to shortest position

Pole saw - by holding the pole at the balance point (close to saw end)

with finger off trigger

with guide bar and chain to rear

WARNING: This product contains chemicals known to the State of Cali- fornia to cause cancer or birth defects, or other reproductive harm.

WARNING: Some dust created by power sanding, sawing, grinding, drill- ing, and other construction activities contains chemicals known (to the state of California) to cause cancer, birth de- fects, or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints

crystalline silica from bricks and ce- ment and other masonry products

arsenic and chromium from chemi- cally-treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well venti- lated area, and work with approved safety equipment, such as those dust masks that are specially designed to flter out microscopic particles.

Kickback

WARNING:Kickbackmayoccurwhen the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightningfastreversereaction,kickingthe guide bar up and back towards the opera- tor. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious injury to user.

Kickback Safety Devices On This Saw

This saw has a low-kickback chain and reduced kickback guide bar. Both items reduce the chance of kickback. Kickback can still occur with this saw.

Follow assembly instructions on page 10. Do not remove front hand guard. Do not replace front hand guard with substitute.

The following steps will reduce the risk of kick- back:

Use both hands to grip saw while saw is running

ENGLISH



www.desatech.com

Image 5
Contents Models RPS2N1 104317, PS1510A Telescoping electric Chainsaw/polesawPara Ayuda Técnica Llame AL Call 1-800-626-2237 for Technical AssistanceContents Read ALL Instructions Important Safety InformationBefore Operating Saw While Operating SawKickback Kickback Safety Devices On This Saw IMPORTANT Safety InformationMaintenance and Storage of Saw Saw Maintenance and Kickback SafetyUnpacking Pole Saw Trimming PrecautionsChain SAW All Models Product IdentificationPolesaw Models 104317, PS1510ATrimming Pruning Process of cutting limbs from a living tree Chain SAW Terms and DefinitionsChain Saw HardwarE Chain Saw AssemblyImportant Do not clamp chain saw in vise during assembly Hand Guard Saw Chain Tension AdjustmentOiling Chain Extension CordsFilling Oil Tank Cutting with the Chain SawBefore Felling a Tree Felling a Tree Cutting Down a TreeFelling Cut Felling Procedure Felling NotchEntire Length Of Log On Ground Limbing a TreeBucking a Log Trimming a Tree Pruning Log Supported On One EndLog Supported On Both Ends RPS2N1 Cutting with the Pole Saw Adjusting Pole Length RPS2N1Cleaning Saw Body Cleaning and MaintenanceNormal Guide Bar Maintenance Care of Guide BarItems Needed to Sharpen Chain Sharpening Saw ChainSharpening Cutters Filing Cutter Depth GaugesReplacement Parts And accessories Repair Service TroubleshootingWarranty Service Non-Warranty ServiceLimited Warranties Remington brand Electric Chain SAWNew Products Factory Reconditioned ProductsModelo RPS2N1 104317, PS1510A Sierra Eléctrica DE Pértiga TelescópicaIntroducción ContentsAL Utilizar LA Sierra Información Importante DE SeguridadLEA Todas LAS Instrucciones Antes DE Utilizar LA SierraEspañol Mantenimiento de la cadena y seguridad contra contragolpes ContragolpesMantenimiento Y Almacenamiento DE SU Sierra Eléctrica Desembalaje Precauciones Para Podar CON LA Sierra DE PértigaSierra Eléctrica Identificación DEL ProductoSierra DE Pértiga Modelos 104317, PS1510ATérminos Y Definiciones DE LA Sierra DE Cadena Ensamblaje Información Sobre LA Sierra DE CadenaAccesorios DE LA Sierra DE Cadena Ajuste DE Tensión DE LA Cadena Serrada Cables DE Prolongación LubricaciónLubricación DE LA Cadena Important no USE aceite estándar para barra y cadenasTala DE UN Árbol Derribamiento de un árbol Realización DE CortesAntes de derribar un árbol AdvertenciaTala final Procedimiento de tala Corte de la muescaTrozado DE UN Tronco Desmembramiento DE UN ÁrbolLa totalidad del tronco sobre el suelo Tronco apoyado en un extremoPoda DE UN Árbol Tronco apoyado sobre ambos extremosPaso ❺ Conecte al cordón de alimentación Ensamble DE LA Sierra DE Pértiga RPS2N1Paso ❷ Inserte el soporte de la pértiga en la sierra Para Cortar CON LA Sierra DE Pértiga Regulación DE LA Longitud DE LA Pértiga RPSN1Limpieza DEL Cabezal Limpieza Y MantenimientoCuidado DE LA Barra DE Guía Mantenimiento normal de la barra de guíaElementos necesarios para afilar la cadena Afilado DE LA CadenaAfilado de los elementos de corte Limado de los calibradores de medida de profundidadCadenas DE Repuesto AlmacenamientoRecambio DE LA Cadena Serrada Accesorios Y Piezas DE Repuesto Limpieza Y Mantenimiento Servicio TécnicoServicio DE Reparación Servicio CON GarantíaFalla Observada Causa Posible Solución Diagnóstico Y Resolución DE ProblemasNuevos Productos Información DE GarantíaManuel Dutilisation ET Dentretien Consignes DE Sécurité Importantes IntroductionInformation SUR LA Tronçonneuse SUR Tige Nettoyage ET EntretienLisez Toutes LES Instructions Consignes DE Sécurité ImportantesAvant D’UTILISER LA Tronçonneuse Pendant Lutilisation DE LA Tronçonneuse Recul Entretien ET Remisage DE LA Tronçonneuse Entretien de la tronçonneuse et protection contre le reculDéballage Tronçonneuse Électrique Identification DU ProduitVocabulaire DE LA Tronçonneuse Assemblage DE LA Tronçonneuse Information SUR LA TronçonneuseQuincaillerie Tronçonneuse Comment tourner la vis de réglage Réglage DE LA Tension DE LA ChaîneRemplissage DU Réservoir D’HUILE Rallonges ÉlectriquesImportant N’UTILISEZ PAS d’huile à chaîne standard Lubrification DE LA ChaîneAbattage D’UN Arbre Sciage Avec LA TronçonneuseAvant d’abattre un arbre AvertissementTrait d’abattage Procédure d’abattage Sifflet d’abattageToute la bille repose au sol ÉbranchageTronçonnage D’UNE Bille Taille D’UN Arbre Élagage La bille est soutenue à une extrémitéLa bille est soutenue aux deux extrémités Étape ❶ Serrer le déclencheur Quincaillerie Scie À PercheÉtape ❷ Insérer le support de la tige dans la poignée Étape ❺ Branchement du cordon électriqueExtenssion de la perche télescopique Comment Couper À L’AIDE LA Scie À PercheNettoyage DU Carter DE Tronçonneuse Nettoyage ET EntretienAvertissement Pournettoyer le carter de la tronçonneuse Entretien DE LA GUIDE-CHAÎNEAffûtage des taillants Affûtage DE LA ChaîneOutils nécessaires pour affûter la chaîne Remisage Remplacement DE LA ChaîneChaînes DE Rechange Pièces DE Rechange ET Accessoires Service TechniqueService DE Réparation Service Sous Garantie Service Hors GarantieDéfaillance Cause Possible Remède Observée DépannageDate Purchased Description QTY Parts List / Lista DE Repuestos / Liste DES PiècesParts List / Lista DE Repuestos / Liste DES Pièces DESCRIPTION/DESCRIPCIÓN/DESCRIPTION FBD Parts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE PiècesREV.A