CLEANING AND MAINTENANCE
Replacing Saw Chain
Replace chain when cutters are too worn to sharpen or when chain breaks. Only use replace- ment chain noted in this manual. Always include new drive sprocket when replacing chain. This will maintain proper driving of chain. Note: For proper chain and drive sprocket, see Parts List, page 74.
Replacement saw chains may be available at your local hardware or home improvement store. The following list gives the specifcations for replacement chains.
All chains will be .050 gauge, 3/8 pitch. 8" chainsaws have 34 drive links 10" chains have 39 drive links
You may also order the replacement saw chains from the "Online Outlet" at www.desatech.com using the part number listed in the illustrated parts list on pages
STORAGE
If storing saw for more than 30 days, follow steps below:
1.Drain oil tank after each use.
2.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mix- ture.
3.Dry guide bar and chain.
4.Place chain in container filled with oil. This will prevent rust.
5.Wipe a thin coating of oil over surface of guide bar.
6.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mix- ture.
7.Store chain saw
•in a high or locked place, out of children’s reach
•in a dry place
TECHNICAL SERVICE
You may have further questions about assembling, op- erating, or maintaining this product. If so, you can visit our Technical Service web site at www.desatech.com or contact our Technical Service Department at
2237 (English Only). You may also write to: DESA Power Tools
ATTN: Technical Service P.O. Box 90004
Bowling Green, KY
When contacting DESA Power Tools, have ready
•Your Name
•Your Address
•Your Phone Number
•Model Number of Product
•Date of Purchase (Include copy of receipt for written requests).
We reserve the right to amend these specifcations at any time without notice. The only warranty applicable is our standard written warranty. We make no other warranty, expressed or implied.
Replacement Parts And accessories
WARNING: Use only replacement parts and accessories described in this manual. Use of other parts or accessories could damage saw or injure operator.
For original replacement parts and accessories, contact your nearest Authorized Dealer or Au- thorized Service Center for this product. If they can not supply the part or accessory, contact your nearest Parts Central listed on page 75. Each Au- thorized Dealer, Authorized Service Center, and Parts Central is independently owned and oper- ated. You may also order parts from the "Online Outlet" at www.desatech.com.
See pages 72 through 74 for an Illustrated Parts List.
If you need additional referral information, contact our Technical Service Department (see Technical Service).
In Canada call
ENGLISH
21 | www.desatech.com |