RedMax HB280 manual Fueling your unit, To extend engine life, avoid, Min ft Rev 12/15/08

FUEL HANDLING

Fueling your unit

1.Untwist and remove the fuel cap. Rest the cap on a clean surface.

2.Put fuel into the fuel tank to 80% of the full capacity.

3.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

WARNING: Select flat and bare ground for fueling. Move at least 10 feet (3 meters) away from the fueling point before starting the engine. Stop the engine before refueling the unit.

At that time, be sure to sufficiently agitate the mixed gasoline in the con- tainer.

Min. 10 ft.

(3 m)

545218616 Rev. 1 12/15/08

To extend engine life, avoid:

1.FUEL WITH NO OIL (RAW GASOLINE) -- It will cause severe damage to the internal engine parts very quickly.

2.GASOHOL -- It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication.

3.OIL FOR 4--CYCLE ENGINE USE -- It can cause spark plug fouling, exhaust port blocking, or piston ring seizure.

4.Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result in the engine failing to operate properly.

5.In the case of storing the product for a long period of time, clean the fuel tank after ren- dering it empty. Next, Start the engine and run the carburetor dry residual fuel.

6.In the case of scrapping the used mixed oil container, scrap it only at an authorized depository site.

English--- 13