| Contents |
|
Chapter 1 General Description | 1 | |
1.1 | Features | 1 |
1.2 | Design Concept | 1 |
| 1.2.1 HIPULSE U Module Design | 1 |
| 1.2.2 Bypass Supplies | 2 |
| 1.2.3 System Control Philosophy | 2 |
| 1.2.4 ECO Mode (For Single UPS Only) | 3 |
| 1.2.5 UPS Power Switch Configuration | 4 |
| 1.2.6 Battery Circuit Breaker | 4 |
| 1.2.7 Battery Temperature Compensation | 4 |
| 1.2.8 System Expansion | 4 |
1.3 | Operation Mode | 4 |
Chapter 2 Mechanical Installation | 6 | |
2.1 | Notes | 6 |
2.2 | Environmental Considerations | 6 |
| 2.2.1 UPS Location | 6 |
| 2.2.2 Battery Location | 7 |
2.3 | Mechanical Considerations | 7 |
| 2.3.1 System Composition | 7 |
| 2.3.2 Moving The Cabinets | 7 |
| 2.3.3 Clearances | 7 |
| 2.3.4 Fixing Of The Magnetic Components | 7 |
| 2.3.5 Cable Entry | 7 |
2.4 | Preliminary Checks | 8 |
2.5 | Installation Drawings | 8 |
Chapter 3 Electrical Installation | 15 | |
3.1 | Power Cabling | 15 |
| 3.1.1 System Configuration | 15 |
| 3.1.2 Cable Rating | 15 |
| 3.1.3 General Notes | 16 |
| 3.1.4 Cable Connections | 16 |
| 3.1.5 Safety Earth | 16 |
| 3.1.6 Protective Devices | 16 |
| 3.1.7 Cabling Procedure | 17 |
3.2 | Distance From Floor To Connection Point | 19 |
3.3 | Control Cabling | 20 |
| 3.3.1 Monitoring Board Ports | 20 |