Cables

Part Number	Description

466907-000	Power Supply, U.S., Wall mount, 90-130 Vac, 60 Hz. in; +5, -12, +12 Vdc
	out (also needs 323227-000 or 276875-000 power cord). Provides power
	to the following obsolete controllers: 2300 serial in enclosure, 4002 seria
644845-000	Power Supply, International. Free standing, 115-230 Vac, 50/60 Hz. in;
	+5, -12, +12 Vdc out (also needs 323227-000 or 276875-000 power cord).
	Provides power to the following obsolete controllers: 2300 serial in
	enclosure, 4002 serial enclosure, and Appl
655465-000	Power Converter, DC to DC, +8 to 30Vdc in, +5V regulated DC out. For
	tapping monitor DC power for internal 2310B, 2500S or 2500U
	controllers.
429761-000	Power cable, low voltage twisted pair for 2310B, 2500S or 2500U. 9 inch,
	2X5F to 1X2F, 9M DC/DC
889507-000	Power cable, low voltage twisted pair for 2310B, 2500S and 2500U. 18
	inch, 2x5F to flying leads.
816821-000	Power cable, low voltage twisted pair for E281-2310MX, 18 inch, 1x3F to
	flying leads (non-standard)
323227-000	Power Cord - Europe. For use with a power supply (pcn 004100-215)
	and/or monitors in Europe.
276875-000	Power Cord - United Kingdom. For use with a power supply (pcn
	004100-215) and/or monitors in UK.
	Cables
793054-000	USB connector cable, 18 inch length, to connect monitor to host computer
775252-000	USB connector cable, 72 inch length, to connect monitor to host computer
451043-000	Touchscreen cable for external controller, 72 in. DB9M to DB9F, goes
	from back of monitor to controller
811847-000	Touchscreen cable for external controller, 108 in. DB9M to DB9F, goes
	from back of monitor to controller
075795-000	Extension cable from controller, internal flat 8 in., 2x6M to DB9M, goes
	from controller to back of monitor.
621717-000	Extension cable from controller, 48 in., 2x6 to DB9F, goes from
	touchscreen controller to DB9F
304477-000	Extension cable from touchscreen cable, 48in., 2x6M to DB9M, goes
	from touchscreen connector to back of monitor.
942741-000	Serial output cable, internal, ribbon 30 in., 2x5F to DB9F, goes from
	controller to back of monitor.
454173-000	Serial output cable, external, 72 in. DB9M to DB9F. Goes from back of
	monitor (with internal controller) to COM port.
459635-000	Ground lead with ring terminals, 17 in., Used to connect serial controller
	or DB9 shell at back of display to chassis ground.
175175-000	Output cable for E281-2303. 72 in. 4-pin male mini-DIN to 4-pin male
	mini-DIN.Goes from 002862-K1 or 002860-K1 to Macintosh ADB port.
084037-000	Macintosh serial cable for touchmonitors with internal serial controllers to
	interface to Macintosh. DB9M to 8-pin mini-DIN male for Macintosh.
980773-000	Standard DIN keyboard power tap cable. E281-2310MX keyboard power
	tap cable.

C-80I n t e l l i T o u c h / S e c u r e T o u c h G u i d e

Part Number