Ampro Corporation COM 830 manual Processor Information

Chapter 2 Specifications

Windows XP Professional Standby Mode (requires setup node “Suspend Mode” in the BIOS to be configured to S1 POS [Power On Suspend])

Suspend to RAM (requires setup node “Suspend Mode” in BIOS to be configured to S3 STR [suspend to RAM])

NOTE The PassMark, Burn-In Test-Suite was used to stress the CPU to 100% workload.

Processor Information

In the following power tables there is some additional information about the processors. Intel® offers processors that are considered to be low power consuming. These processors can be identified by their voltage status. Intel uses the following terms to describe these processors. If none of these terms are used then the processor is not considered to be low power consuming.

LV=Low voltage ULV=Ultra low voltage

When applicable, the above mentioned terms will be added to the power tables to describe the processor. For example:

Intel® Core™ Duo L2400 1.66GHz 2MB L2 cache LV

Intel® also describes the type of manufacturing process used for each processor. The following term is used:

nm=nanometer

The manufacturing process description is included in the power tables as well. See example below. For information about the manufacturing process, visit Intel's website.

Intel® Core™ Duo L2400 1.66GHz 2MB L2 cache LV 65nm

Table 2-3. COM 830 Intel® Core™ Duo U2500 1.2GHz 2MB L2 cache

COM 830-R-30	Intel® Core™ Duo U2500 1.2GHz 2MB L2 cache
	ULV 65nm
	Layout Rev.B945LX0 /BIOS Rev. B945R007
Memory Size	512MB
Operating System	Windows XP Professional SP2
Power State	Desktop Idle	100%	Standby (S1)	Suspend to
		workload		Ram (S3)
Power consumption (measured	0.99A/11.88 W	2.07A/24.84 W	1.62A/19.49W	0.81A/9.78W
in Amperes/Watts)

8 Reference Manual COM 830