Chapter 4 | BIOS Setup Description |
Boot Device Priority
Feature
Options
Description
Boot Priority Selection | Device Based | Select between device and type based boot priority | |
| Type Based | lists. The “Device Based” boot priority list allows | |
| you to select from a list of currently detected devices | ||
|
| ||
|
| only. The “Type Based” boot priority list allows you | |
|
| to select device types, even if a respective device is | |
|
| not yet present. Moreover, the “Device Based” boot | |
|
| priority list might change dynamically in cases when | |
|
| devices are physically removed or added to the | |
|
| system. The “Type Based” boot menu is static and | |
|
| can only be changed by the user. | |
|
|
| |
1st, 2nd, 3rd, ... | Disabled | This view is only available when in the default “Type | |
Boot Device | Primary Master | Based” mode. | |
| |||
(Up to 12 boot devices | Primary Slave | When in “Device Based” mode you will only see the | |
| |||
can be prioritized if | Secondary Master | ||
devices that are currently connected to the system. | |||
device based priority |
| ||
Secondary Slave | The default boot priority is Removables 1st, ATAPI | ||
list control is selected. | |||
| CDROM 2nd, Hard Disk 3rd, BEV 4th (BEV = Boot | ||
If “Type Based” | Legacy Floppy | ||
Entry Vector, e.g. Network or SCSI | |||
priority list control is | USB Harddisk | ||
| |||
enabled only 8 boot |
| ||
|
| ||
devices can be | USB CDROM |
| |
prioritized.) | USB Removable Dev. |
| |
|
| ||
| Onboard LAN |
| |
| External LAN |
| |
| PCI Mass Storage |
| |
| PCI SCSI Card |
| |
| Any PCI BEV Device |
| |
| Third Master |
| |
| Third Slave |
| |
| PCI RAID |
| |
|
|
|
76 | Reference Manual | COM 830 |