
Chapter 4 | BIOS Setup Description |
Hard Disk Security User Password
Feature
Options
Description
Primary/Secondary
Master/Slave HDD
User Password
enter password
Set or clear the user password for the hard disk.
Note: This option will be shaded if the hard drive does support the Security Mode Feature set but user failed to unlock the drive during BIOS POST.
Hard Disk Security User Password
Feature
Options
Description
Primary/Secondary
Master/Slave HDD
Master Password
enter password
Set or clear the master password for the hard disk.
Note: This option will be shaded if the hard drive does support the Security Mode Feature set but user failed to unlock the drive during BIOS POST.
Power Setup
Select the Power tab from the setup menu to enter the Power Management setup screen.
Feature | Options | Description |
Power Management / | Disabled | Set this option to allow or prevent chipset power |
APM | Enabled | management and APM (Advanced Power |
| Management). | |
|
| |
|
|
|
Suspend Timeout | Disabled | Specifies the length of time of inactivity the system |
| 1- 60 Min | waits before it enters suspend mode. |
|
|
|
Video Power Down | Disabled | Specifies the power state that the video subsystem |
Mode | Standby | enters when the BIOS places it in a power saving state |
| after the specified period of display inactivity has | |
|
| |
| Suspend | expired. |
|
|
|
Hard Disk Power | Disabled | Specifies the power state that the hard disk drives |
Down Mode | Standby | enter after the specified period of hard drive inactivity |
| has expired. | |
| Suspend | |
|
| |
|
|
|
<Device> | Ignore | Determines whether the device activity is monitored |
| Monitor | by the power management timer or not. |
|
| |
|
|
|
Resume On Ring | Disabled | Disable / enable RI signal (= GPE2 on pin 89 of X4 |
| Enabled | connector) to generate a wake event. |
| If enabled wake is possible from all power down | |
|
| |
|
| states including S5 (Soft Off). |
|
|
|
Resume On PME | Disabled | Disable / enable PCI PME to generate a wake event. |
| Enabled | If enabled wake is possible from all power down |
|
| states including S5 (Soft Off). |
|
|
|
Resume On RTC | Disabled | Disable / enable RTC to generate a wake event. |
Alarm | Enabled | If enabled wake is possible from all power down |
| ||
|
| states including S5 (Soft Off). |
|
|
|
80 | Reference Manual | COM 830 |