
Chapter 4 |
| BIOS Setup Description | ||
USB Configuration Submenu |
|
| ||
|
|
|
|
|
| Feature | Options | Description |
|
| USB Functions | Disabled | Disable |
|
|
| 2 USB Ports | Enable UHCI host controller 0. |
|
|
| 4 USB Ports | Enable UHCI host controller 0 + 1. |
|
|
| 6 USB Ports | Enable UHCI host controller 0 + 1 + 2. |
|
|
| 8 USB Ports | Enable UHCI host controller 0 + 1 + 2 + 3. |
|
|
|
|
|
|
| USB 2.0 Controller | Enabled | Enable the |
|
|
| Disabled |
|
|
|
|
|
|
|
| Legacy USB Support | Disabled | Legacy USB Support refers to the USB keyboard, USB |
|
|
| Enabled | mouse and USB mass storage device support. |
|
|
| Auto | If this option is Disabled, any attached USB device will not |
|
|
|
|
| |
|
|
| become available until a USB compatible operating system |
|
|
|
| is booted. However, legacy support for USB keyboard will |
|
|
|
| be present during POST. |
|
|
|
| When this option is Enabled, those USB devices can |
|
|
|
| control the system even when there is no USB driver |
|
|
|
| loaded. |
|
|
|
| AUTO disables legacy support if no USB devices are |
|
|
|
| connected. |
|
|
|
|
|
|
| USB Keyboard Legacy | Disabled | Enable/Disable USB keyboard legacy support. |
|
| Support | Enabled | NOTE: This option has to be used with caution. If the |
|
|
|
| system is equipped with USB keyboard only, the user |
|
|
|
| cannot enter setup to enable the option back. |
|
|
|
|
|
|
| USB Mouse Legacy | Disabled | Enable/Disable USB mouse legacy support. |
|
| Support | Enabled |
|
|
|
|
|
|
|
| USB Storage Device | Disabled | Enable/Disable USB mass storage device support. |
|
| Support | Enabled |
|
|
|
|
|
|
|
| Port 64/60 Emulation | Disabled | Enable/Disable the “Port 6h/64h” trapping option. Port |
|
|
| Enabled | 60h/64h trapping allows the BIOS to provide full PS/2 |
|
|
|
| based legacy support for USB keyboard and mouse. It |
|
|
|
| provides the PS/2 functionalities like keyboard lock, |
|
|
|
| password setting, scan code selection etc. to USB |
|
|
|
| keyboards. |
|
|
|
|
|
|
| USB 2.0 Controller | FullSpeed | Configures the USB 2.0 host controller in HiSpeed |
|
| Mode | HiSpeed | (480Mbps) or FullSpeed (12Mbps). |
|
|
|
|
|
|
| BIOS EHCI | Disabled | Enable workaround for OSs without EHCI |
|
|
| Enabled | support. |
|
|
|
|
|
|
| USB Beep Message | Disabled | Enable/Disable the beep during USB device enumeration. |
|
|
| Enabled |
|
|
|
|
|
|
|
| USB Stick Default | Auto | Select default USB stick emulation type. Auto selects |
|
| Emulation | Hard Disk | floppy or hard disk emulation based on the storage size of |
|
|
| the USB stick, but the emulation type can be manually |
| |
|
|
|
| |
|
|
| reconfigured for each device using the Mass Storage |
|
|
|
| Device Configuration sub menu. |
|
|
|
|
|
|
70 | Reference Manual | COM 830 |