Safety Instructions
RANDOM ACCESS - Random Access should be selected if the user intends to make only a few adjustments.
SERVICE - Service should be selected if the user intends to delete blocks, change password or apply information.
IRIS - This selection will only be available when the autoconvergence unit IRIS is connected to the projector.
While in Guided or Random Access adjustment Mode, the user may use an external source, an internally generated genlocked pattern or an internally generated multifrequency cross hatch pattern as a setup pattern.
Warning during the start up of the installation mode.
WARNING
RISK OF ELECTRICAL SHOCK
NO USER ADJUSTABLE PARTS
INSIDE
THE FOLLOWING
INSTALLATION MENUS
ARE RESERVED TO,
AND TO BE PERFORMED ONLY
BY BARCO PERSONNEL, OR
BARCO AUTHORIZED DEALERS
IF QUALIFIED, PRESS <ENTER> TO CONTINUE, OR IF NOT, <EXIT> TO RETURN.
Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks you to enter your password. (Password protection is only available when the password DIP switch on the controller module is in the ON position. Contact a BARCO authorized technician when no password is requested during the adjustment procedure and password protection is desired.)
Your password contains 4 digits.
a) Adjusting the projector with the RCU.
Enter the digits with the numeric keys on the RCU.
Example : 2 3 1 9
For each digit entered, a 'X' appears on the screen under the displayed text 'enter password'.
When your password is correct, you get access to the 'Adjustment mode'.
When the entered password is wrong, The message 'Wrong password !!!' will be displayed. The projector stays on the previous selected item.
Factory programmed password : 0000
enter |
password |
xxxx |
197 |
WRONG |
PASSWORD |
!!! |
198 |
b) adjusting the projector with the local keypad.
When the 'compose password' menu is displayed, select with control disk the first digit of your password and press ENTER. Continue by selecting the second digit with the control disk and press ENTER. Handle in the same way for the third and fourth digit.
When your password is correct, you get access to the 'Adjustment mode'.
When the entered password is wrong, the message 'Wrong password' will be displayed.
Once the password is correctly entered, all other password protected items are accessible without
When
COMPOSE | ||
PASSWORD | ||
| ??? |
|
7 | 8 | 9 |
4 | 5 | 6 |
1 | 2 | 3 |
| 0 |
|
Select with | , | |
|
| or |
then <ENTER> | ||
<EXIT> to return | ||
| 5975977 BARCODATA 708 260597 | |
|