Barco R9002120 manual Selecting Setup Pattern, Internal Cross Hatch Pattern, Internal # Pattern

Page 28

Random Access Adjustment Mode

Selecting Setup Pattern

If an external source is connected to the projector, this menu will be displayed. Push the control disk up or down to highlight the desired setup pattern and then press ENTER.

Genlocked pattern : internally generated cross hatch pattern, locked on the external source.

Internal # pattern : internally generated cross hatch pattern and locked on internal generated sync signals. (No external source necessary)

ENTER continues to Random Access Adjustment Mode or Internal # Pattern Selection

EXIT returns to Path Selection menu ADJUST returns to Operational mode

If no external source is connected to the projector, the internal cross hatch pattern menu will be displayed.

Note: The menus in this manual are created for an external source, connected to one of the inputs, and the 'Genlocked Pattern' is selected.

Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
	Source 01
Select with	or
then <ENTER>
<EXIT> to return.

Internal Cross Hatch Pattern

The Internal # pattern menu will be displayed if the internal cross hatch pattern has been selected or if no source is connected to the projector.

The table below lists the 8 fixed factory preset frequencies available. Another 8 blocks are custom programmable.

Push the control disk up or down to highlight the desired cross hatch frequency. Push the control disk tp the left or to the right to scroll to another page. Press ENTER if the desired block is selected.

kHz/Hz
15.6/50	PAL/SECAM
15.7/60	NTSC
31.2/50	EDTV
31.5/60	IDTV
31.2/50	HDTV EUREKA
31.5/60	HDTV ATV
33.7/60	HDTV HIVISION
15.8/60	EGA 1
21.8/60	EGA 2
31.5/60	VGA 3
31.5/70	XGA 1, 2
35.5/87	VGA 4
44.2/70	SUPER VGA 2
48.5/60	SUPER VGA 1
61.0/76	SUPER VGA 3
63.9/76	APOLLO

ENTER continues to the Random Access Adjustment Mode.

EXIT returns to the Setup Pattern Selection menu.

	INTERNAL # PATTERN
kHz / Hz
15.6/50	PAL/SECAM
15.7/60	NTSC
31.2/50	EDTV
31.5/60	IDTV
31.2/50	HDTV EUREKA
31.5/60	HDTV ATV
	Select with	or
	scroll with	or
	<ENTER> to accept
	<EXIT> to return

6-2		5975977 BARCODATA 708 260597

Image 28

Contents R9002120 Page Barco Projection Systems Date Art. No 260597 R5975977Barco nv/Projection Systems Noordlaan Kuurne BelgiumTable of Contents Start UP of the Adjustment Mode Options Table of Contents Safety Instructions On safetyOn installation On cleaningOn servicing On repackingRear Panel Terminology Location and Function of ControlsFront Panel Terminology Gaining access AdjustexitControl panel terminology a. The local keypad RCU control panel terminologyLocation and Function of Controls Location and Function of Controls Power mains cord connection Switching on/offSignal input connection to the projector ConnectionsSource No Projector input Press digit button Connecting a Composite Video sourceVideo input selection Connecting a S-Video or Video source to port Input selectionConnecting a RGB Analog source with Tri-level sync Connecting a RGB Analog source with composite syncRgbs or RGsB input selection Connecting a Component source Connecting a Component source with Tri-level syncRGB3S or RG3sB input selection YYB-YS orR-YYsB-Y input selectionConnecting a VS05 switcher to the projector Connecting an IR Remote Receiver to the projectorRemote control YYB-Y3S or R-YY3sB-Y input selectionBattery installation in the RCU ControllingHow to display a projector address? How to use the RCUProjector address How to program an address into the RCU? Input selection Source No Projector input Press buttonPicture controls Pause keyAdjustment mode Adjustexit StandbyenterPassword WrongStarting up the random access adjustment mode Overview random Access Adjustment modeInternal Cross Hatch Pattern Selecting Setup PatternInternal # Pattern Random access adjustment mode selection menu Picture TuningSync Fast/Slow Adjustment Color BalanceLine Doubler option Port 2 S-Video/VideoPeaking Color SelectGeometry Adjustments Horizontal Phase AdjustmentGeometry GeometryRaster Shift Adjustment Projected rasterCrt faceplate border Raster ShiftLEFT-RIGHT E-W Left-Right east-west AdjustmentsLEFT-RIGHT E-W Top-Bottom north-south Adjustments TOP-BOTTOMTOP-BOTTOM N-S TOP-BOTTOM N-SVertical Linearity Adjustment Size AdjustmentLinearity Blanking Adjustments BlankingConvergence Adjustment Random Access Adjustment Mode Starting up the Service mode Overview flowchart Service modeIdentification Projector Set-upData Total Run Time Change passwordChange Language Power up mode Change Projector AddressChange baudrate BaudrateBARCOlogo Memory managementBarco Logo Memory ManagementDeletion of blocks Copy a blockDeleting block by block All settings to midposition Undo all settings to midposALL Settings to Midpos Undo ALL Settings to MidposConvergence mid Undo R & B convergence midGreen convergence mid Undo green convergence midCommon Settings G2 AdjustmentCommon Settings G2 AdjustmentCRT Drive Mode Projector warm upProjector Warm UP Projector Warm UPI2C Diagnostics Permanent Boost Mode USEService Mode Enter Password Text on Text off I2C error Addr FH3Fh= 15.6 kHz Fv= 050 Hz Invalid Code entry End of ad- just rangeRcvds com Munication Error Iris commu Nication ErrorProjector Will Switch off StartingOptions Magik Interface Orbiting Kit Line Doubler KitCeiling mount CM50 Adapter and communication cablesAdjustment Blocks memory blocks Adjustment Blocks and SourceSource numbers 90 Barcodata 708 Insert Card