The Status line at the bottom of the Status screen can display the follow- ing UPS status conditions:
• | Runtime Calibration | • | In Bypass |
• | Waiting to Power Load | • | Sleeping – Delayed Wakeup |
• | Smart Boost | • | Sleeping – Inverter Shutdown |
• | Smart Trim | • | Forcing Graceful Shutdown |
• | • | Sleeping – Low Battery | |
• | • | Shutdown Overload – Unable | |
• | Low Battery |
| to Transfer to Battery |
• | Replace Battery | • | UPS Fault |
The following fault conditions display only when
• | Main Relay | • | Iso Unit Fan |
• | Batt Charger | • | Bypass Supply |
• | Bypass Relay | • | Voltage Select |
• | Internal Temp | • | DC Imbalance |
• | Elec Unit Fan |
|
|
If the UPS is powered off during a status request,
UPS Powered OFF
14