APC AP9608, AP9208 manual Rim

Page 22

If the UPS is powered off during a status request, Call-UPSII responds with the message:

UPS Powered OFF

In addition to providing general status information, the UPS Status and Diagnostics screen serves as a menu for obtaining more detailed informa- tion on the Symmetra frames and external frames.

To go to the Main Frame screen, type 1 and press ENTER. The following display will appear.

 

 

Main Frame

 

 

 

+---------------

+–--------------+

 

L1-

Power

Module

None

-RIM

 

No Module IIC

OK

-IM

 

+---------------

+---------------

+

 

L2-

Power

Module

Battery

 

 

OK

 

OK

 

 

+---------------

+---------------

+

 

L3-

Power

Module

Battery

 

 

OK

 

OK

 

 

+---------------

+---------------

+

 

L4-

Power

Module

Battery

 

 

OK

 

OK

 

 

+---------------

+---------------

+

 

L5-

Power

Module

Battery

 

 

BAD

 

None

 

 

+---------------

+---------------

+

 

<ENTER>=Refresh, <ESC>=Status Menu, ?=Help, or module code for details>

The Main Frame screen is a map of the Symmetra array. The left column displays the five levels of power module slots (L1 to L5). The box at the top of the right column displays the status of the Redundant Intelligence Module (RIM) on the first line and the status of the Intelligence Module (IM) on the second line. The remainder of the right column displays the four levels of batteries. The power module and battery boxes display the status of the corresponding power module or battery on the second line.

The Main Frame screen also serves as a menu for more detailed informa- tion on each of the power modules and the intelligence modules. By typ- ing L1 and pressing ENTER, for example, you can view a screen that dis- plays information regarding Power Module L1. For information on the Intelligence Module, type IM and press ENTER, and so on. Included in this information are hardware and firmware version numbers and the

18

Image 22
Contents Call-UPSII Thank You Contents Problem Resolution Overview IntroductionHardware Requirements Management Port Product DescriptionCall-UPS II Panel UPS Monitoring Port External VersionUPS Cable External Version Power Port External VersionWith Smart-UPS With Matrix-UPS Status Indicator Status LED IndicationHandling Installation and SetupInstallation Receiving InspectionConfirm Operation External VersionConfigure Call-UPS Initial Logging OnCustomize Settings Press any key to bring up the Main menuConnect to Modem SmartSlot Configuration External Configuration Operation UPS Status and DiagnosticsLogging On to Call-UPS With Smart-UPS and Matrix-UPS UPS Status Smart-UPS and Matrix-UPS Description Sleeping Inverter Shutdown With Symmetra Power Array UPS Status and Diagnostics Symmetra Power Array DescriptionUPS Status and Diagnostics Page RIM Page UPS Control Command DescriptionUPS Control UPS Control UPS Characteristics Call-UPS II will not allow changes to UPS characteristics Sensitivity of the UPS to power line fluctuation. Set this With Symmetra Power Array UPS Characteristics Symmetra Power Array Setting Description Data/Event Logging MenuDefault Description DATA/EVENT LoggingCall-UPS Settings CALL-UPSCALL-UPS II Settings CALL-UPS II Settings Default Description Paging Setup Site IDspace charactertrouble codePaging Setup Paging Setup Setting Default Description Paging Setup Events Event DescriptionMeasure-UPS Info ProbeMEASURE-UPS Info Troubleshooting Problem ResolutionTroubleshooting Chart Problem Possible Cause SolutionIf Problems Persist Management Port Pinout SpecificationsPin Function Physical Product SpecificationsElectrical EnvironmentalDevice Priority Position Appendix Multiple SmartSlot InstallationTriple Chassis Daisy Chains Symmetra Power ArraySmart-UPS and Matrix-UPS Page Page Page Limited Warranty Toll free technical support