APC AP9608, AP9208 manual DATA/EVENT Logging, Default Description

DATA/EVENT LOGGING

Item	Default	Description
Power		Call-UPS II will log power events, such as utility
	ON	line failure and battery exhausted , when enabled.
Events
		Enter 0 when prompted to disable, 1 to enable.
		Call-UPS II will log control events, such as UPS
UPS Control	ON	tu rned on and UPS in bypass, when enabled. Enter
		0 to disable, 1 to enable.
		Call-UPS II will log UPS faults, such as UPS is
UPS Faults	ON	overloaded, and internal temperature too high,
		when enabled. Enter 0 to disable, 1 to enable.
User		Call-UPS II will log user activity, such as users
	ON	logging on and password changes, when enabled.
Activity
		Enter 0 to disable, 1 to enable.
		Call-UPS II will log Measure-UPS alarms, e.g.,
Measure-UPS	OFF	high temperature, low temperature, and contact
		closure, when enabled. Enter 0 to disable, 1 to
		enable.
List Event	Display s a list of all reportable events, sorted into event
Groups	groups.
View Event	Displays the event log. Call-UPS II pauses af ter each page of
Log	log information.
Reset Event	Clears the event log. Log information is kept in non-volatile
Log	memory, so log items remain even when Call-UPS II is off.
	Queries the UPS for operating data at preset intervals (see
Log UPS Data	next item) and displays this information on the screen.
	Call-UPS II reports date, time, current line voltage, mini-mum
to Screen	line voltage, maximum line voltage, battery voltage, line
	frequency, internal UPS temperature, and UPS load.
Log	Time interval at which Call-UPS II queries the UPS for log
	data. The default is 1 minute. Set from 1 to 99 minutes
Interval
	between queries, depending on how much data is needed.
	Choose one of two log data output formats. Use text, the
Data Format	default, if the data will be used in word processing programs.
	Use the comma delimited format for importing the data into
	spreadsheets or databases.

28