APC AP9608, AP9208 manual UPS Characteristics Symmetra Power Array Setting Description

UPS CHARACTERISTICS (Symmetra Power Array)

Setting	Description
Output	Output voltage of the UPS, in volts AC.
Output Freq	Output frequency range of the UPS, in hertz.
Range
Output Voltage	Desired output voltage setting. The default setting, Auto,
	indicates that output voltage equals the nominal input
Reporting base
	voltage. Other settings are 208 VAC and 240 VAC.
	Instructs the UPS to go to bypass mode or to drop the
If UPS fails …	load in the event the UPS fails and the frequency or
	voltage is out of range of their settings (see 1 and 2 on
	this menu).
Low Battery	Time interval between low-battery warning and
	shutdown of the UPS. Select from values between 2 and
Duration
	10 minutes.
	Time interval between the issuance of a UPS turn off
Shutdown Delay	command and actual shutdown of the load. Since the
	UPS notifies the computer of the impending shutdown,
	Shutdown Delay allows for graceful turn off.
	Time interval after which the UPS turns on after
Return Delay	restoration of utility power. Use Return Delay to prevent
	branch circuit overloads.
	Battery capacity desired for UPS restart after a power
Return Battery	outage. Select from values between 0% and 90%. At
	0%, the UPS will restart as soon as utility line power
Capacity
	returns to normal. With other settings, the UPS will
	charge the batteries to the specified level prior to restart.
Scheduled Self	Time intervals between UPS battery self-tests
Test
	Three alarm thresholds. An alarm will sound if any of
Alarm if …	the three alarm settings — calculated runtime, load, and
	redundancy — is out of range. For a description of these
	settings, see UPS Status and Diagnostics table, Sec. 4.2.
Reset UPS to	Returns the UPS to its default state. Type YES (all
Default	uppercase) and press ENTER when prompted to confirm
Settings	resetting. Any other entry stops resetting.

26