APC AP9208, AP9608 manual MEASURE-UPS Info

	MEASURE-UPS INFO
Item	Description
TEMP	Curren t ambient temperature of each attached probe, in
	degrees Celsius.
Lo Limit	Setting for the low temperature Measure-UPS alarm.
	Choose from 9.94 (the default), 14.02, 18.10, and 4.08
(Temp)
	degrees Celsius.
Hi Limit	Setting for the high temperature Measure-UPS alarm.
	Choose from 32.13 (the default), 45.90, 54.06, and
(Temp)
	23.97 degrees Celsius.
HUMIDITY	Current percentage of relative humidity of each probe.
Lo Limit	Setting for the low humidity Measure-UPS alarm.
	Choose from 20.1 (the default), 30.2 , 40.3, and 10.0
(Humidity)
	percent relative humidity.
Hi Limit	Setting for the high humidity Measure-UPS alarm.
	Choose from 80.0 (the default), 84.5 , 90.1, and 70.0
(Humidity)
	percent relative humidity.
F/W	Firmware revision number of Measure-UPS.
	Status display of current Measure-UPS alarms, which
	can include Lo Temp, High Temp, Lo RH, Hi RH, and
Current Alarms	the four contact closures. The earlier sample screen
	shows Hi Temp and Lo RH because the reported values
	for these items exceed their respective alarm limits.

Press ENTER at the > prompt on the Measure-UPSscreen to display fresh readings.

37