APC AP9608, AP9208 manual CALL-UPS II Settings

		CALL-UPS II SETTINGS
Setting	Default		Description
Set Date	–		Current date in mm/dd/yy format.
Set Time	–		Current time in hh:mm:ss format. Call-UPS II uses
			24-hour format.
Set			From 0 to 8 alphanumeric characters. Use no
	APC		characters (press enter when prompted for the
Password
			password) f or no password.
Dial			Dial Back Security feature. With Dial Back on,
	OFF		Call-UPS II hangs up when called, and then calls the
Back
			number you set for the Dial Back String (see next).
			Dial string used to implement dial-back security (see
			preceding). Call-UPS II prefaces this string with the
			attention command, so do not include AT in the
Dial	DT5551212		strin g. Use industry standard dial strings of up to 20
Back Str			alpha-numeric characters for the telephone number of
			th e modem to be called back. Use the vertical bar
			(pipe) character () to start a new line in the string.
			Make sure the remote modem is set to answer calls.
			Description of the physical location of the UPS. Use
			up to 40 alphanumeric characters. Call-UPS II does
Location	Physical …		not wordwrap, so use the vertical bar (pipe) character
			() to start a new line. For example, “ACME Com-
			panyAny Town” will display: ACME Company
			Any Town
Ansi	OFF		Causes Call-UPS II to send ANSI standard color
Color			display escape sequences when on.
			Call-UPS II communication setting, in bits per second.
			Choose between 1200, 2400, 9600, and 19,200 bps.
			Set to the highest supported bit rate of the DTE port
Baud			of the modem or other DCE equipment in use. Many
	9600		mod ems have DTE port rates that are higher than the
Rate
			communication link rate in order to support data
			compression. For example, many 9600 baud modems
			will support bit rates of 19,200 or higher at their DTE
			ports. Consult your modem user manual.

30