Vixel 335 manual Click Back to Non-overlapping Zone Info to view the changes

Vixel Model 335 Installation & Configuration Guide		CHAPTER 3 Management
Note: You can have	To view the non-overlapping zoning, click Non Overlapping. The Non Overlapping
simultaneous overlapping	Zone Information page appears.
and non-overlapping
zoning. Overlapping zoning
operates in Zone 1 and
non-overlapping zoning
operates in Zones 2-12.

Figure 3-27.Non-Overlapping Zone Information Page

To modify the port configurations in the various zones:

1.Click Change Non Overlapping Zones. The Non Overlapping Zones Information page appears with the ports available for modification.

	Figure 3-28.Non-Overlapping Zones Information (Configuration) Page
Note: Ports 11 and 12 are	2.	Click the Zone drop-down box for the specific port and select the zone for which
always in Zone 1.		you want the port to be a member. The port can be in one of twelve zones.
	3.	Click Submit to accept the changes.
	4.	Click Back to Non-overlapping Zone Info to view the changes.

34