Vixel 335 manual OS Information, Detection Indication

Vixel Model 335 Installation & Configuration Guide CHAPTER 3 Management

OS Information

The Ordered Sets Information page displays the Ordered Sets that are being transmitted on the switch by their associated port number.

To view the Ordered Sets Information page:

1.Click FC Switch. The FC Switch Information page appears.

2.Click OS Info. The Ordered Set Information page.

Figure 3-10.Ordered Set Information Page

If there is a connection, then the Ordered Set transmission information for that connection is depicted by an "X".

A list of the Ordered Sets and their indications follows:

Detection	Indication
Non-Overlap Zone	Displays the zone for which the port is configured.
Transceiver	Displays the status of the inserted transceiver in the port.
Sync	A stable signal has been detected and IDLEs transmitted.
Match	The ordered set or pattern selected under the Match area has
	been detected.
EOF	An End-of-Frame (EOF) delimiter has been detected; frames are
	present on the loop. (An EOF immediately follows the CRC of a
	frame and signals the frame’s end.)
SOF	A Start-of-Frame (SOF) delimiter has been detected; frames are
	present on the loop.
IDLE	Sequences of IDLEs are being transmitted to maintain link
	activity; no other data is being transmitted.
ARBff	ARB(FF)s are being transmitted to maintain link activity; no
	other data is being transmitted.
ARB	A port is arbitrating for loop access to perform a task.

21