GE LP11U user manual Enclosure

Page 44

g

Digital Energy™ LP Series

UPS Type	:	5-11U	6-11U	8-11U	10-11U
ENCLOSURE
Sheet steel cubicle	:	VSD2	VSD2	VSD2	VSD2
Colour front	:	RAL 9006 (aluminum)
Colour cabinet	:	RAL 9010 (white)
Protection	:	IP 20
Dimensions (hxwxd, mm)	:	680x313x730	680x313x730	680x313x730	680x313x730
Dimensions (hxwxd, inch)	:	26.8x12.3x28.7 26.8x12.3x28.7		26.8x12.3x28.7	26.8x12.3x28.7
(height with castors)
Weight (with batteries, Kg)	:	134 kg	134 kg	175 kg	186 kg
Weight (with batteries, Lbs)	:	295 Lbs	295 Lbs	386 Lbs	410 Lbs
GENERAL DESIGN CRITERIA
Mechanical	:	IP20
Humidity	:	95% non condensing
Safety	: UL 1778; 2001, C-UL
		EN 50091-1-1: 1999; EN 60950 / IEC 950: 2001
Surge capability	: 6kV 1.2/50µs; 3kA 8/20µs
EMC	: FCC part 15, class A; EN 50091-2
ENVIRONMENT
Ambient temperature	: -10 to +40°C (14 to 104°F)
Audible noise at 1 meter	:	40 - 50dB(A),
		the audible noise is load and temperature dependent

LX: OPM_LPU_11U_5K0_10K_1US_V030

42

GE DE LP 11U UPS: Installation / User Manual 3.0 (US)

Image 44

Contents Digital Energy LP 11U Page Digital Energy LP Series Important Safety Instructions Interfacing Features General Important Safety InstructionsInstallation Storage BatteriesDescription WarrantyIntroduction Functional Explanation Principles of OperationAutomatic Bypass Switch Installation Package ContentsTransport Unpacking LocationUPS model Tightening torque force Utility voltage UPS model 120V 208V 240VOutput voltage UPS model 120V 208V 240V LP 5/68/10-11U Standard installation procedure LP 5/6-11U Installation procedure 120V input Bypass tap factory setting 208 Volt Available input voltages hardware modificationsInput voltage 208 or 240Vac Bypass tap changed to 240 VoltOutput voltage 208Vac Input voltage 120Vac optional, 5/6kVA onlyAvailable output voltages hardware modifications Output voltage 120Vac split-phase LP 5/6/8/10-11U Output tap changeOutput voltage 120Vac single phase Output voltage 220/230/240VacSetup Screens Input VoltageInput Voltage Change to Output VoltageLP 5/6/8/10-11U Installation of battery pack Installation of parallel operating LP-U UPSs Autorestart OFF Setting Mismatch Autorestart OFF Press EnterMaintenance ECO-modeNo-load shutdown Manual bypassOperation Description of Front and Rear PanelRear panel of the step-up transformer Rear panel Step-up transformerStart-up Selftest ProgressBattery 23C UseInput Line Autonomy Time Left Operating Time 0YEAR 29DAYSTemp TOO High On Line Alarm Press UPStatus and Alarm Menu Inverter OFF Battery Charger no Float Capacitor C1 Capacity LOWBattery Depleted Service Screens Service MenuInput and Output not Synchronized Software Version R2.9 FAN Speed INV.DC +Automatic Bypass Enabled Tstamp Q4Language English Input Voltage Output Voltage Output FrequencyFrequency Range 2% PLL Lock Speed Normal FAN CurveTest Screens Automatic Bypass Enabled Service Warning DisabledQuick Battery Test Start Calibrate BAT Test Activated Deep Battery TestProcedure Other Features Overload protection in bypass modeShutdown Utility startSuperior Battery Management ECOAuto Restart OFF Press Enter Auto restartInterfacing Features RS232 / contact interfaceEmergency shutdown Relay Card optional Snmp Interface optionalOptional Features Extended RuntimePlug-in Cards RPA-Facility Redundant Parallel ArchitecturePDM Power Distribution Module Seismic anchorsMaintenance SafetyRecycling the UPS at the end of service life Cooling fanSelftest Failure Q4 not OK TroubleshootingSelftest Failure Temp TOO High Specifications UPS Type 11U 10-11UAutomatic Bypass Switch Enclosure Dimensions Conduit Box Center of GravityLP 5/6/8/10-11U installation drawings LP 5/6/8/10-11U 208-240V input LP 5/6-11U 120V input