Bay Technical Associates DS73, DS2-RPC, DS4-RPC, DS2-RPC DS4-RPC owner manual Selecting a Device

DS-RPC OWNER’S MANUAL QUICK START

__________________________________________________________________________________________

Or this menu if the DS71-MD2 is used:

Data Switch Series - F.0.13

Bay Technical Associates

Unit ID: DS71-MD2

Port Select Code: $BT

Attention Character: ;

Use the “Attention Character” to display the remainder of the menu.

Device A	(2,1)	1
Device B	(2,2)	2
Device C	(2,3)	3
Device D	(2,4)	4
DS-RPC	(3,1)…………5
Configure		C
I/O Modules Reset		RM
Unit Reset		RU
Exit.........................…...............X
Logout		T
Enter Request:

NOTE: These menus depict a typical DS2-RPC setup. The DS4- RPC may have more menu items, depending on the setup.

	If this is not an initial set-up and Password
	has already been enabled, you are prompted
	to login. After logging in successfully,
	access the main menu by sending the
	attention character five times (;;;;;).
Selecting a Device	From the main menu, select the number of
	the device you wish to access, followed by
	<cr>. To return to the main menu, send the
	attention character five times (;;;;;).

7