Bay Technical Associates DS73, DS2-RPC, DS4-RPC, DS2-RPC DS4-RPC owner manual Dial-UP

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

From the configuration menu, select #1, “Module IP Address,” followed by <cr>. The DS73TP responds:

Enter Module IP address in dotted decimal form:

Enter the Module IP Address (Example: 200.4.3.50), followed by <cr>. The DS73TP resumes the configuration menu.Default Module IP Address is 0.0.0.0.

If you fail to enter the Module IP Address in dotted decimal form, the DS73TP responds again:

Enter Module IP address in dotted decimal form:

The DS73TP responds indefinitely with the same request until the Module IP Address in entered in the correct form.

IMPORTANT: The Module IP Address and the Dial-Up Address must be different in order for the DS73TP to function correctly.

NOTE: There should be no active connections while configuring the DS73TP, and the unit should be reset upon completion of configuration.

Dial-UP	The Dial-Up IP Address consist of four
IP Address	bytes, each byte ranging from 0 to 255.
	From the configuration menu, select #2,
	“Dial-UP IP Address,” followed by <cr>.
	The DS73TP responds:

55