DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
Type "B" for 115.2K baud rate. The DS71 responds with the new configuration status:
Module 1 Serial Port Configuration :
Port | Device | Baud | Word | Stop | Parity | Xon/ | Xoff/ | Line | Drive |
| Name | Rate | Size | Bits |
| Xmit | Recv | DTR | RTS |
1 | 115.2K | 8 | 1 | None | Off | Off | High | High | |
Exit/Save..….......1 | Set Parity...….........5 |
|
|
|
|
| |||
Set Baud Rate….2 | Set Xon/Xoff….......6 |
|
|
|
|
| |||
Set Word Size….3 | RTS Line Driver....7 |
|
|
|
|
| |||
Set Stop Bits..…..4 | DTR Line Driver...8 |
|
|
|
|
| |||
Enter Request : |
|
|
|
|
|
|
|
|
Set Word Size by selecting #3, “Set Word Size.” The DS71 displays the following list of available word sizes:
1 | For 5 | |
2 | For 6 | |
3 | For | 7 |
4 | For | 8 |
Enter the corresponding number for the desired word size. The DS71 responds with the new configuration status:
Module 1 Serial Port Configuration :
Port | Device | Baud | Word | Stop | Parity | Xon/ | Xoff/ | Line | Drive |
| Name | Rate | Size | Bits |
| Xmit | Recv | DTR | RTS |
1 | 115.2K | 8 | 1 | None | Off | Off | High | High | |
Exit/Save..….......1 | Set Parity...….........5 |
|
|
|
|
| |||
Set Baud Rate….2 | Set Xon/Xoff….......6 |
|
|
|
|
| |||
Set Word Size….3 | RTS Line Driver....7 |
|
|
|
|
| |||
Set Stop Bits..…..4 | DTR Line Driver...8 |
|
|
|
|
| |||
Enter Request : |
|
|
|
|
|
|
|
|
To permanently save configuration changes, select 1, “Exit/Save,” from the selection menu, followed by <cr>. The DS71 responds:
Change Host Device to Match NEW Configuration
Before Answering this Request
Save Changes Permanently ? (Y/N) :
30