DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
Type “Y” for yes or “N” for no followed by <cr> to toggle the existing status or type <cr> for no change. The DS71 or
CONNECT PORT | When enabled, Connect Port ID Echo | |
ID ECHO | identifies the module number and port | |
| number you are connected to. Choose the | |
| port device name or the module and port | |
| number to echo when a DS71 or | |
| module selects a port on a the DS74 module. | |
| Default Connect Port ID Echo is disabled. | |
| From the configuration menu, select #7, | |
| “Connect Port ID Echo,” followed by <cr>. | |
| The DS71 or | |
| current status of Port ID Echo and asks if you | |
| want to change: |
|
| Port ID Echo is | Disabled |
| Change It? (Y/N): |
|
Type “Y” for yes followed by <cr> to toggle Connect Port ID Echo or “N” for no followed by <cr>. If you answer yes, the DS71 or
Disable Port ID Echo…................ 1
Use Module, Port number..….......2
Use Device Name.........…...............3
Exit..........................................…... X,CR
Enter Request:
38