Bay Technical Associates DS2-RPC, DS4-RPC, DS73 Default Connectivity Timeout is, Minutes

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

Modem to Modem Xon/Xoff Flow Control is ....Disabled

Enable? (Y/N, CR for no change):

	Type “Y” for yes followed by <cr> if you
	want to enable Xon/Xoff. Type “N“ for no
	followed by <cr> if you want to disable
	Xon/Xoff. Type <cr> for no change. The
	DS71-MD2 stores the change in non-volatile
	memory and returns to the Local Modem
	Setup menu.
Connectivity	Configure the amount of connectivity (5 to
Timeout	255 minutes) before the modem
	automatically disconnects. Entering a time
	of 0 disables Connectivity Timeout. The
	timer starts when the modem answers (DCD
	high). The modem will disconnect,
	regardless of activity, when time runs out.
	Default Connectivity Timeout is 60
	minutes.
	Select #3, “Connectivity Timeout,” from the
	Local Modem Setup menu, followed by
	<cr>. The DS71-MD2 displays the current
	setting and asks if you want to change:
	Modem Connectivity Time-out is	60 minutes
	Change It? (Y/N) :

Type “Y“ for yes followed by <cr>. The

DS71-MD2 responds:

Enter Connectivity Time-out (5 to 255, 0 = Disabled)

or press ENTER for no change :

Enter the number of connectivity minutes (5 to 255) or enter 0 to disable. The DS71- MD2 displays the new setting and asks if you want to change. If there are no further changes, type <cr>. The DS71-MD2 stores changes in non-volatile memory and returns to the Local Modem Setup menu.

47