Bay Technical Associates DS73, DS2-RPC, DS4-RPC Programmable Features of the DS Modules con’t

DS-RPC OWNER’S MANUAL INTRODUCTION TO THE DS-RPC

__________________________________________________________________________________________

PROGRAMMABLE FEATURES OF THE DS MODULES (con’t)

FEATURE	DESCRIPTION	ACTION	PAGE
			NO.
	DS71-MD2 HOST MODULE
Rings to	The number of times the modem rings	Enter number of rings to	45
Answer(*)	before it automatically answers.	auto answer
	Default = 2 rings
Modem to	ASCII character used to stop or start	Enable/ Disable Modem to	46
Modem	transmission of data.	Modem
Xon/Xoff(*)	Default = Disabled
Connectivity	Configures the amount of connectivity	Enter timeout in minutes.	47
Timeout(*)	(5 to 255 minutes) before modem	Enter 0 to disable
	disconnects. Default = 60 minutes
Escape	Allows ASCII characters to be	Enter the character you wish	48
Character(*)	interpreted as commands instead of data.	to use as an escape
	Default = 43 (+)
Unit ID	Unique ID for DS-Series unit.	Enter unit ID	48
	Default = DS71 or DS71-MD2
	DS74 PERIPHERAL I/O MODULE
Serial Port	Sets serial port speed for each I/O port	Enter baud rate, data bits,	51
Configuration	on the DS74. Default = 9600, 8, 1, N,	stop bits, parity, Xon/Xoff,
	Xon/Xoff Disabled, RTS/DTR Low	and DTR/RTS line driver
Port Device	Unique ID for each I/O port as displayed	Enter port device name	52
Name	on the main menu. Default = Device A,
	Device B, Device C, Device D, etc.

Table 1 (con’t)

4