Bay Technical Associates DS2-RPC DS4-RPC, DS73 owner manual Programmable Features of the DS Modules

DS-RPC OWNER’S MANUAL INTRODUCTION TO THE DS-RPC

__________________________________________________________________________________________

PROGRAMMABLE FEATURES OF THE DS MODULES

Highlighted features indicate items most often programmed

FEATURE

DESCRIPTION

ACTION

PAGE

NO.

DS71 or DS71-MD2 HOST MODULE

Serial Port	Sets serial port speed of the DS71 and	Enter baud rate, data bits,	28
Configuration	DS71-MD2Default = 9600, 8, 1, N,	stop bits, parity, and
	Xon/Xoff Disabled	Xon/Xoff
Port Device	Uniquely identifies the port (or device	Enter the device name	34
Name	connected to the port). Default = Host
	EIA-232 and Host MODEM (DS71-
	MD2 only)
Port Select Code	ASCII character string used to select a	Enter Port Select Code	35
	port or module. Default = $BT
Attention	A character sent in sequence five times	Enter Attention Character	36
Character	to invoke the main menu.
	Default = ;
Disconnect	Provides reliable binary data	Enable/Disable Disconnect	37
Time Guard	transmission. Default = Disabled	Time Guard
Port ID Echo	Echoes the module number and port	Enable/Disable Connect Port	38
	number when you connect to the port.	ID Echo
	Default = Disabled
Header	Unit information that appears upon login	Enable/Disable Header	39
	Default = DS71 or DS71-MD2
Password	Password protection for dial-up and	Enable/ Disable, and Program	40
	EIA-232 connections.	Password
	Default = Disabled
Menu	Provides a menu interface for device	Enable/Disable Menu	41
	selection, and configuration.
	Default = Enabled
Auto Connect	Allows automatic connection to a	Enable,/Disable, and Program	42
Port	specified port upon dial-up or	Auto Connect Port.
	EIA-232 connection.
	Default = Disabled
DCD	External modem returns to logoff state	Enable/Disable menu	44
Logon/Logoff	when DCD line goes low.	selection and make hardware
	Default = Enabled	jumper change
(DS71 only)

Table 1

3