Bay Technical Associates DS73, DS2-RPC, DS4-RPC, DS2-RPC DS4-RPC owner manual DTR RTS Host

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

If you have made necessary changes to the host device, type "Y" for yes, followed by <cr>. New configuration changes are stored permanently in non-volatile memory.

The unit returns with the following message:

Enter Host Device Number (1-2) :

If you have completed your Serial Port configuration then <cr>.

PORT DEVICE NAME Port Device Name is a user programmable feature that uniquely identifies the port (or device connected to the port) you are configuring. The DS71 has one host device and the DS71-MD2 has two host devices.

The default name for the host device in

Port 1 is EIA-232. The default name for

Port 2 (MD2 only) is Host MODEM.

Select #3, “Port Device Name,” followed by <cr>. The DS71-MD2 module responds:

Enter Host Device Number (1-2)

Select the number of the host device whose Port Device Name you want to program. The DS71-MD2 responds with a menu similar to the following. The DS71 goes directly to this menu:

Module 1 Device Name :

Port	Device	Baud	Word		Stop	Parity	Xon/	Xoff/	Line	Drive
	Name	Rate	Size		Bits		Xmit	Recv	DTR	RTS
1	HOST	9600	8		1	None	Off	Off	High	High
	EIA-232
				Enter Port Device Name (Max. 16 characters):
				or press ENTER for no change ...........:

34