Bay Technical Associates DS73, DS2-RPC, DS4-RPC owner manual Default Password is BTA, disabled

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

NOTE: This header may appear different depending on type of module installed.

From the selection menu, select #1, “Header,” followed by a carriage return <cr>. The DS71 displays the current header status and asks if you want to enable:

	Header is	Disabled
	Enable? (Y/N, CR for no change):
	Type “Y“ for yes followed by <cr> if you
	want to enable Header status. Type “N“ for
	no followed by <cr> if you want to disable
	Header. Enter <cr> for no change.
Password	To change Password or Enable/Disable
	Password upon login, select #2, “Password,”
	from the selection menu, followed by <cr>.
	Default Password is BTA, disabled. The
	DS71 or DS71-MD2 module responds:

Change Password.....................1

Enable/Disable......................... 2

Exit.....................................…...X, CR

To change the current password, select #1, “Change Password,” followed by <cr>. The DS71 or DS71-MD2 module responds:

Enter New Password (1 - 8 char., CR to end):

Enter the new password up to 8 ASCII characters followed by <cr>. The DS71 or DS71-MD2 module stores the new password in non-volatile memory and returns to the selection menu.

40