Bay Technical Associates DS2-RPC DS4-RPC, DS73, DS2-RPC, DS4-RPC Escape Character ........…

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

From the configuration menu, select #9, “DCD Logon/Logoff,” followed by <cr>. The DS-series module displays the current DCD Logon/Logoff status and asks if you want to change: DCD logon/logoff factory default is enabled:

DCD Logon/Logoff mode is	Enabled
Enable ? (Y/N, CR for no change) :

Type “Y“ for yes followed by <cr>. Type “N” for no followed by <cr>. Type <cr> for no change.

LOCAL MODEM SETUP The DS71-MD2 has an internal 14.4K bps

DS71-MD2 ONLY) modem. Programmable modem characteristics include number of rings to answer, modem to modem Xon/Xoff handshaking, amount of inactivity before the modem automatically disconnects (connectivity time-out), and the escape character used to tell the modem the information you are sending is a command and not data (command mode).

From the configuration menu, select #9, “Local Modem Setup,” followed by <cr>. The following Local Modem Setup menu appears:

Local Modem Setup:
Rings to Answer......…..............................1
Modem to Modem Xon/Xoff	2
Connectivity Time-Out	3
Escape Character........…..........................4
Exit..................................….......................X
Enter Request:

45