Bay Technical Associates DS2-RPC DS4-RPC, DS73 If enabled, the following header and menu appears

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

If enabled, the following header and menu appears:

Data Switch Series - F.0.10

Bay Technical Associates

Unit ID: DS71

Port Select Code: $BT

Attention Character: ;

Device A	(2,1)	1
Device B	(2,2)	2
Device C	(2,3)	3
Device D	(2,4)	4
Configure		C
I/O Modules Reset		RM
Unit Reset		RU
Exit		X
Logout		T
Enter Request:

Select #3, “Menu,” from the selection menu, followed by <cr>. The DS71 or DS71-MD2 module displays the current menu status and asks if you want to enable:

Menu is............................ Disabled

Enable? (Y/N, CR for no change):

Type “Y” for yes followed by <cr> if you want to enable Menu. Type “N“ for no followed by <cr> if you want to disable Menu. Type <cr> for no change.

NOTE: If Auto Connect Port is enabled, Header and Menu are automatically disabled.

Auto Connect Port	If Auto Connect Port has been enabled, the
	initiation of power to the DS71 or DS71-MD2
	module will connect the user to the
	designated I/O port. This also happens when a
	modem connection is established.

42