Bay Technical Associates DS2-RPC DS4-RPC, DS73 Port Device Name …..............................3

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

DS74 CONFIGURATION If you are using the Menu Selection Method, select C, “Configure,” followed by a carriage return <cr> from the DS-RPC Main Menu. The following selection menu appears:

Configuration
Module 1	1
Module 2	2
Module 3	3
Select Port	S
Exit	X
Enter Request :

If you are using the ASCII Character String Method, exit main menu, then select the module to configure. To select Module #2, type $BT2<cr>. The DS-RPC responds “Requested Connection Made.” Send the ASCII configuration command $CONFIG. The above configuration menu appears.

Select the module number that corresponds to the DS74 module you want to configure. The following configuration menu appears:

Copyright (C) Bay Technical Associates 1998
DS71 Data Switch Series – EIA-232 I/O Module
Module 2
Status ..….................................................1
Serial Port Configuration	2
Port Device Name …..............................3
Configure Another Module	C
Exit	X
Enter Request :

NOTE: The Serial Port Configuration and the Port Device Name procedures are thoroughly outlined on page 28 and page 34 of this manual. Only the differences will be noted in text here.

51