Avery ALS 330/430 manual Menu structure

Operators Manual

ALS 330/430

		4.2.2 Mounting a new label roll		25
		4.2.3 Adjusting the pressure roller		27
		4.2.4	Lead screw adjustment	28
		4.2.5 Adjustment of the dispensing edge		28
		4.2.6	Printer adjustment	28
		4.2.7	Adjust pressure roller	29
	4.3	Initializing new label material		29
	4.4	Control of dispense unit		30
		4.4.1	Dispenser Menu selection	30
		4.4.2 Missing label function and web breaks		30
		4.4.3 Display and data input		31
	4.5	Maintenance		34
5.	Menu structure			37
	5.1	Standard menu		39
	5.2	Extended standard menu		41
	5.3	Product menu		47
6.	Configuration menu			43
	6.1	Handling the menu		44
	6.2	Menu functions		45
7.	Serial interface			51
	7.1	Data of the serial interface		51
	7.2	Interface commands		52
8.	Connections and signals			55
	8.1	Output signals		55
		8.1.1 Error and warning output		55
		8.1.2	Printer output	55
		8.1.3	OD-Control output	55
		8.1.4	Ready output	55
	8.2	Applicator modes		56
		8.2.1 Signals for direct dispense		56
		8.2.2 Control signals for the ASA applicator		57
		8.2.3 Signals for the EP applicator		58
		8.2.4	Applicator connector	59
	8.3	Input signals		60
		8.3.1	Product sensor	61
		8.3.2	OD Control sensor	62
		8.3.3	APSF sensor	63
		8.3.4	Control signals	64

Release 4/06 Contents