American Power Conversion 400kW1MW installation manual APC Warranty on Batteries

Page 63

APC Warranty on Batteries

APC warrants that its supplied High-Rate series of Valve Regulated Lead Acid batteries will be free of defects in material and workmanship for a period of one (1) year from date of shipment. This amounts to the same basic warranty that is being offered by the leading battery manufacturers. Additional coverage can be procured through purchase of an extended warranty. Call your APC representative for information concerning the various types of extended warranties available.

Battery functionality is typically impacted by age and environmental conditions, and therefore certain requirements must be met by the end-user pursuant to this warranty. Failure to adhere to the following conditions may put the warranty at risk.

APC-supplied batteries must always be kept in a climate-controlled environment, and should be re- charged at a minimum of every three (3) months in situations where no automatic charging takes place. The battery environment must be free of excessive moisture, construction dirt, corrosive elements, or other contaminants. The temperature range must be maintained at 22° to 25° C / 72° to 77° F for batteries in an operating environment, and 0° to 25° C / 32° to 77° F for batteries in a storage environment. The relative humidity must be maintained at 0 to 95%, non-condensing.

APC must be notified immediately upon suspicion of possible battery defects, and be subsequently given authority to inspect any sites containing potentially defective batteries. If APC determines its supplied batteries to be defective due to material or workmanship, APC will repair or replace those batteries at its option, F.O.B. factory, without charge. Should battery repair or replacement occur as a result of this warranty, the warranty period will be pro-rated accordingly.

APC shall not be liable under this warranty if its testing and examination disclose that the alleged defect in the product does not exist or was caused by the purchaser’s, or any third person’s misuse, negligence, improper installation or testing, unauthorized attempts to repair of modify, or any other cause beyond the range of the intended use, or by accident, fire, lightning, or other hazard.

There are no warranties, express or implied, by operation of law or otherwise, of products sold or furnished under this agreement or in connection herewith. APC disclaims all implied warranties of merchantability, satisfaction, and fitness for a particular purpose. APC’s express warranties will not be enlarged, diminished, or affected by and no obligation of liability will arise out of, APC’s rendering of technical or other advice or service in connection with the products. The foregoing warranties and remedies are exclusive and in lieu of all other warranties and remedies. APC’s warranties run only to purchaser and are not extended to any third parties.

Battery Rack Assembly and Installation Manual

57

Image 63
Contents Assembly and Installation Manual Battery Racks for 400kW-1MW UPS SystemsBattery Rack Assembly and Installation Manual Contents Rack Assembly Appendix C Employing Sidecars Battery Rack Assembly and Installation Manual Safety Safety warningsSafety precautions Additional considerations Specifications Rack/battery optionsWeights and dimensions Shipping and Receiving ShippingReceiving Placement PositioningHandling Torque specifications Installation SiteInstallation considerations Installation equipmentAPC P/N Parts ListBattery Cabling Assembling the bottom section Rack AssemblyRefer to graphic in below Assembling the top section Top Side Subassembly #2 870-1657A Bottom Side Subassembly #2 Top Side Subassembly #1 Cross Bar #6 Top Side Subassembly #2 Connection Stabilizing the rack Accessing your wiring diagrams Anchoring the rack optionalNumbering the batteries Addressing the bottom shelf Positioning rails on shelvesWiring the batteries Rack Assembly Stud Terminal Addressing the second shelf Addressing the third shelfAddressing the top shelf Shelf-to-shelf wiring Assembling the second rack Employing sidecars to support separated racks Labelling the terminal blocksConnecting terminal blocks to battery breakers To Battery Breaker #1 BAT 1- terminal Connecting terminal blocks to batteries Rack #1, Top Shelf Terminal Block #1 Shelf-to-shelf From Battery #24 Rack #2, Top Shelf Terminal Block #2 Shelf-to-shelf From Battery #56 Reattaching terminal block covers Applying warning labelsGrounding the racks APC GlossaryStyle E, rack #1, shelf #1 top Appendix a Battery Wiring Style EStyle E, rack #1, shelf #2 Style E, rack #1, shelf #3 Style E, rack #1, shelf #4 bottom Style E, rack #2, shelf #1 top Style E, rack #2, shelf #2 Style E, rack #2, shelf #3 Style E, rack #2, shelf #4 bottom Appendix B Battery Cabling Kits References for Power battery cablesReferences for Fiamm battery cables Sidecar overview Appendix C Employing SidecarsPositioning and accessing the sidecar Connecting terminal blocks to sidecars To BAT To BAT 2+ Appendix C Employing Sidecars At the Sidecar Connecting sidecars to battery breakersBAT 2+ Top BAT BAT 1+ Top Battery Rack Assembly and Installation Manual Battery Rack Assembly and Installation Manual Battery Rack Assembly and Installation Manual APC Warranty on Batteries APC Worldwide Customer Support 990-4194A03/2004