Toshiba TF 610 Enter the user name, 13 GB, Confirm with Enter Press STOP, return to standy mode

Installation

Enter the user name

The transmission header not only contains the terminal ID but also the user name. This can contain up to 20 characters. Each digit features several characters which can be activated by repeatedly pressing the corresponding key. If you have found a character of your choice, press the „P“ key to got to the next position. Use the „O“ key to got back one letter and make any corrections. Use the „0“ key to select special characters. If you enter too many characters, press the CANCEL key to delete the unwanted characters.

When the name is complete, press the ENTER-key.

Example: TOSHIBA

15-03 19:56 M 100%

PROGRAM SETUP DATA

LOCAL NAME

ENTER

NAME:

NAME: TOSHIBA

ENTER

STOP

Standby mode

Start the menu

Select submenu

Page through the menu...

...until you reach this menu item

Confirm with ENTER

Make your selection

Enter the name Example: TOSHIBA

1 x 8 = T # 3 x 4 = I # 3 x 6 = O # 2 x 2 = B # 4 x 7 = S # 1 x 2 = A 2 x 4 = H #

Name is complete

Confirm with ENTER

Press STOP, return to standy mode

TF 610 TOSHIBA Installation 13 GB