Preparation
Insert memory card
1.Pull the plug out of the mains socket.
2.Remove the cover for the memory module (on the rear of the FAX machine) by loosening the retaining screw.
3.Press the retaining lug into the hole on the motherboard.
4.Position the memory expansion on the connector of the motherboard and press carefully until it snaps into place.
5.Close the cover of the memory module and tighten the retainer screw again.
Safety instructions
When your fax machine is open, always keep the following in mind:
In case you come into contact with toner:
•Do not touch any parts inside the fax machine other than those described here. The fixer cover can be very hot - even after the machine has been switched off.
•You should install the process unit as quickly as possible as exposure to strong light can demage the drum and reduce the life of the process unit.
•Never throw old toner cartridges into an open fire and ensure proper disposal of packing from exchanged parts as organic waste.
•Wash hands in cold water and clean thoroughly with soap.
•Wash eyes with plenty of water.
•If you have inhaled toner, breathe deeply in the open air.
•If toner gets in your mouth, wash it out with plenty of water.
•In an emergency, call a doctor.
TF 610 TOSHIBA | Preparation | 9 GB |