Toshiba TF 610 53 GB, Following functions Parmeter Are available, Description, Advanced settings

Advanced settings

The following functions (Parmeter)
are available:
Function no.	Function	Description
01	ECM	Error correction (ECM) is as follows:
		ON:	Activated
		OFF:	Deactivated
02	CONFIRMATION	Transmission report is produced:
		ON:	After every transmission
		CONFIRMATION OFF: Only after
		transmission errors.
03	FIRST PAGE IMAGE	A part of the document (to recognize it)
		can be printed on the report.
		REPORT VISUAL ON:		print
		REPORT VISUAL OFF:		print not
04	HEADER PRINT	Select, if the TX header will be transmitted
		to te other party.
		ON:	Is transmitted
		OFF:	Is not transmitted
05	RECEIVE FOOTER	Select, if the actual date and time will be
		printed on the footer line of received
		documents.
		ON:	Is printed
		OFF:	Is not printed
06	TX SPEED	Preset transmission speeds, transmission
		BPS = BIT / Sec.
		9600 BPS, 7200 BPS, 4800 BPS, 2400 BPS
07	RCV SPEED	Preset transmission speed, reception
		BPS = BIT / Sec.
		9600 BPS, 4800 BPS
13	RDC ACCEPTANCE	Actual COMLINE status
		ON	COMLINE enabled
		OFF	COMLINE disabled
		ONE	only one COMLINE session

20 ]	DIAL METHOD TONE	Dialling method:	DTMF
			PULSE DIALLING
21	REDIAL TIMES	Number of redial attempts if transmission
		is not successful
		02	2 twice
		~
		10	10 times
22	REDIAL INT.	Period between redial attempts if
		transmission is not successful
		30 SEC	30 seconds
		~
		1 MIN
		2 MIN
		3 MIN
		10 MIN
		20 MIN	20 minutes

23 DUAL INTERVAL

✽) This function may not be available in machines in certain countries.

Period between redial attempts if line is

busy
1 MIN	1 minute
~
10 MIN	10 minutes

TF 610 TOSHIBA Advanced settings 53 GB