UK Connection information
Reset
START STOP
You can restore the original factory settings or reset your fax machine if you are unable to eliminate the error code by taking the action suggested on pages 63- 66.
15.03.98 19:56
Switch off your fax machine.
Keep START and STOP pressed down
while switching your machine back on.
As soon as a message is displayed, release.
After reset, repeat the installation procedure (see page 10).
The abbreviated numbers, date and time will NOT be erased.
We declare, that TOSHIBA is using 
mark in compliance with
EN 50
This TOSHIBA Facsimile Transceiver is intended for connection to public telecommunication services as follows:
By using the cable described as TEL LINE CABLE in the packaging list of the instruction manual. This cable plugs into the socket on the left hand side of the TF 610 which is marked LINE and the other end into the standard PSTN analogue socket found in the UK.
This terminal equipment complies with the following requirements:
Group 3 fax modem Automatic call initiation Storage of telephone numbers for retrieval by a predetermined code Automatic dialling
Automatic repeat attempts Call progress monitor Series connection facility LD or MF dialling
Operation with or without dial tone being present.
Any other usage will invalidate the approval of the apparatus if as a result, it then ceases to conform to the standards against which approval was granted.
EPA ENERGY STAR
Addendum to the TF610 Operator’s Manual
The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the ENERGY STAR Program, to encourage the widespread and voluntary use of
For more information on the ENERGY STAR Program, please contact:
ENERGY STAR Printers/Fax Machines
US EPA (62021)
Washington, DC 20460
ENERGY STAR is an U.S. registered mark.
GB 78 UK Connection information | TOSHIBA TF 610 |