Toshiba TF 610 manual Function no Description, GB 54 Advanced settings

Advanced settings

Function no:	Function	Description
24	BUSY TONE	The successful detection depend on the
		PBAX.
		ON:	active
		OFF:	not active
25	PUBLIC LINE	Type of connection
		PUBLIC LINE: Before dialling a tone check
		is made, PABX tones are not accepted
		PABX: Dialling after a delay of 3 sec., no
		tone check before begin of dialling
		INIT WAIT 4 SEC: Dialling after a delay of
		4 sec., no tone check before begin of
		dialling
		~
		INIT WAIT 6.0 SEC: Dialling after a delay
		of 6 sec., no tone check before begin of
		dialling
26	PAUSE WAIT TONE	Procedure after obtaining public line/
		pause wait
		PAUSE WAIT TONE: Further dialling only
		after line access dial tone, PABX tones
		are not accepted
		PAUSE WAIT 3.0 SEC: Dialling after a
		delay of 3 sec., no tone check, after
		obtaining public line/pause wait
		~
		PAUSE WAIT 6.0 SEC: Dialling after a
		delay of 6 sec., no tone check, after
		obtaining public line/pause wait
27	ACCESS	Procedure for obtaining public line
		(*-key)
		NO PUBLIC LINE
		PUBLIC LINE FLASH:Flash-Function
		PUBLIC LINE EARTH KEY:
		Earth key Function
		PUBLIC LINE DIGIT: Public line
		obtained via code
28	ACCESS CODE	Enter a (max.) 4-digit code for obtaining
		public line. (only useful by ACCESS DIGIT)
36	CALLING TIMES	Number of synthetic ring signals set in
		the TEL/FAX mode
		1 SYNTH. RING TEL/FAX		1 ring
		~		10 rings
		10 SYNTH. RINGS TEL/FAX
37	AUTO DELAY	Number of rings before the fax machine
		connects to the line in the automatic
		receive mode (AUTO lamp is lit)
		1st RING
		~
		10th RING
38	RCV MODE=	Reception type in automatic mode (AUTO
		LED is lit)
		TEL/FAX	TEL/FAX mode
		FAX/TAD	FAX/TAD mode
39	TEL DELAY	Not relevant for European models

GB 54 Advanced settings TOSHIBA TF 610