Installation
Connection to PABX, further settings
If you wish to connect your fax machine to a PABX, further settings are necessary. The following menu procedure sets default values for connecting a fax machine to PABXs. If the machine does not operate perfectly, please refer to page 56 for explanations concerning connection to PABXs.
PROGRAM SETUP DATA
2 x
PARAMETER NUMBER =_
ENTER
LINE = PUBLIC LINE
LINE = PBX
ENTER
STOP
Start the menu
Select submenu (2x)
Make your selection
Enter function number
Confirm with ENTER
Current setting
The fax machine waits for the dial tone sent by the exchange before dialling starts.
Page through the menu...
...until you reach the desired menu item The setting INIT WAIT X SEC involves a pause of X seconds
before dialling starts. The fax does not check the presence of
a dial tone.
Confirm with ENTER
Press STOP, return to standy mode
TF 610 TOSHIBA | Installation 17 GB |