
1 TROUBLESHOOTING FOR THE HARDWARE
3 Lower the guide while holding the knob.
Do not touch the stapling area (A in the figure).
The actual needle point could cause you personal injury.
A |
4 Remove any jammed staples with something sharp.
5 Holding the knob, raise the guide, and return it to its original position.
6
7
Fit the staple cartridge into the stapler.
Insert the staple cartridge until you hear a click sound (the staple cartridge is latched). Then lower the lever slightly.
Close the front cover of the finisher.
1 |
2 |
Clearing a Staple Jam 33