Toshiba 555, 855, 755, 655 manual „ Originals and paper, Guide

Page 99

8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT

„ Originals and paper

Problem Description

Cause

Corrective Action

 

 

 

The original is jammed.

The original is unavailable on the

Check whether the original is available on the equipment.

 

equipment.

For details, refer to Chapter 2 of the Copying Guide.

 

 

 

Paper is jammed.

The paper is unavailable on the

Check whether the paper is available on the equipment.

 

equipment.

For details, refer to Chapter 1 of the Copying Guide.

 

 

 

 

The paper size setting registered for

Match the size of the paper placed in the drawer or on the

 

the equipment is inconsistent with

bypass tray and the size registered on the equipment.

 

paper in a drawer or on the bypass

For Details, refer to Chapter 1 and 2 of the Copying

 

tray.

Guide.

 

 

 

 

The stack of paper exceeds the

Remove some paper to set it within the height limit line

 

loading line indicated on the side

indicated on the side guide.

 

guide.

 

 

 

 

 

There is too little or too much

Adjust the space between the paper and the side guide or

 

clearance between the paper and the

the end guide not to take much spaces.

 

side guide of the drawer.

For details, refer to Chapter 1 of the Copying Guide.

 

 

 

 

Hidden jammed paper has not been

Check the sign again on the touch panel to see where the

 

removed.

jam occurred.

 

 

P.11 “Clearing a Paper Jam”

 

 

 

Two or more sheets of paper are

Sheets of paper are stuck together.

Loosen the stack of paper well and set them again.

fed together.

 

 

 

 

 

Sheets do not align when exiting.

Sheets are placed in the drawer with

Check the printing side of the sheets and place them

 

the wrong side up.

correctly. Information about the printing side may be given

 

 

on the wrapping paper of the sheets.

 

 

If you cannot find which side is the printing side, try

 

 

printing on both sides to see if the sheets align when

 

 

exiting.

 

 

 

When You Think Something Is Wrong With the Equipment 97

Page 98 Page 100
Image 99
Page 98 Page 100
Contents Troubleshooting Guide Page ‰ Trademarks „ How to read this manual ‰ Symbols in this manualPreface ‰ ScreensPage Contents Troubleshooting for Scanning Regular Maintenance Contents Replacing a Toner Cartridge Cleaning the Hole Punch Dust BinClearing a Paper Jam Clearing a Staple JamMessages Displayed on the Touch Panel Message Problem Description Corrective ActionChange Drawer to Correct Error Codes „ Locating a paper jam Clearing a Paper JamAfter clearing the jam, close all the opened covers „ Clearing a paper jam‰ Tips on removing the jammed paper Clear the paper jam„ Paper jam in the Reversing Automatic Document Feeder Lower ‰ If paper jams occur frequentlyClose the Reversing Automatic Document Feeder „ Paper jam in the Reversing Automatic Document Feeder UpperLower the original feeder tray Close the upper cover „ Paper jam in the bypass trayClose the transport guide Under the guide plate„ Paper jam in the External Large Capacity Feeder optional Separate the finisher from the equipment Clearing a Paper Jam Clearing a Paper Jam Clearing a Paper Jam Clearing a Paper Jam Open the paper feed cover „ Paper jam inside of the equipmentConnect it with the equipment It could burn or injure you Open the fuser unit cover „ Clearing paper jams caused by a wrong paper size setting Presspanel. the User Functions button on the control ‰ Jam when making copies or prints using a drawerClearing a Paper Jam ‰ Jam when making copies or prints using the bypass tray ‰ Jam when printing from the FAXTurn off the main power switch Drawer button on the touch panel Remove any jammed staples with something sharp Clearing a Staple JamClose the front cover of the finisher „ Staple jam in the Saddle Stitch Finisher MJ-1029Lower the guide while holding the knob „ Staple jam in the saddle stitch unit Fit the staple cartridges Remove the jammed staplesClearing a Staple Jam Replacing a Toner Cartridge Replacing a Toner CartridgeShakeinside.the new toner cartridge well to loosen the toner Toner supplying operation automatically starts „ Replacing a Near Empty toner cartridge See Refilling With Staples „ Refilling Saddle Stitch Finisher MJ-1029 staples Refilling With Staples „ Refilling saddle stitch unit staples Close the lower cover of the Saddle Stitch Finisher Fit the new cartridgesCleaning the Hole Punch Dust Bin Page Copying Problems Troubleshooting for CopyingProblem Description Cause Corrective Action Copying ProblemsCopying Problems Page Client Problems Print Job ProblemsPrinter Driver Problems Network Connection Problems„ Clearing print job errors Print Job ProblemsTo print by setting suitable-size paper in the drawer Problem Description „ Retrieval of printer configuration failed Printer Driver Problems„ Cannot print port setting problems „ Command line options not processed„ Cannot print a job as expected using PS3 printer driver Network Connection Problems „ Cannot print with SMB print„ Cannot print properly with AppleTalk print „ Checking the client status Client ProblemsHardware Problems „ Startup page not printed„ Print jobs not output Page Scanning Problems Troubleshooting for ScanningScanning Problems „ Cannot E-mail my scans„ Cannot find the data saved in the shared folder Filing Web Utility Problems Troubleshooting for e-FilingFiling Web Utility Problems „ e-Filing Web Utility terminates the session„ Numerous sub windows repeatedly appear Message Corrective Action „ Error messagesFiling Web Utility Problems Locating the Equipment in the Network Ldap Search and Authentication ProblemsPrinting Problems Network Related Network Fax N/W-Fax Driver Problems„ Cannot locate the equipment in the network Locating the Equipment in the Network„ Cannot locate the equipment with Local Discovery Check the network settings following the checklist below „ Equipment does not respond to ping command„ Ldap authentication takes a long time Ldap Search and Authentication ProblemsPrinting Problems Network Related „ Novell print in a NetWare environment „ IPP print in a Windows operating system environment„ UNIX/Linux environment „ Macintosh environmentNetwork Fax N/W-Fax Driver Problems ‰ Problem with the current printer setup ‰ This port is currently in use‰ Fax transmission cannot be performed with a cover sheet Checking the Equipment Status Error Messages Error CodesPrinter Error Hardware Status Icons on TopAccess Device TabPaper Empty TopAccess Message Corrective Action Error MessagesDocuments in the Scan folder have been deleted by a user MFP Error Messages „ Error codes on print jobs Error CodesA2A1 „ Error codes on transmission and reception Device name 3D20 „ Error codes on scan jobs Save as File Store to e-Filing Perform the print with the administrator’s password. If Regular Maintenance When You Think Something Is Wrong With the Equipment„ General operations When You Think Something Is Wrong With the EquipmentGuide „ Originals and paperScanning area surface of the long rectangular glass Regular MaintenanceIndex User information DP-5550/6550/7550/8550 OME08016900 Multifunctional Digital Systems
Top Page Image Contents