3. Telephone
3.7Viewing and calling back using caller information
You can easily view caller information and call back. The display will show the number of new calls in standby mode.
Example: 10 NEW CALLS 10:59AM
{A}{B} {Caller ID}
{Monitor} {Stop}
{Start}
1Press {Caller ID}.
LThe display will show the number of new calls.
2Press {A} to search from the recently received caller information.
L If you press {B}, the display order will be reversed.
L To stop viewing, press {Stop}.
3Lift the handset or press {Monitor} to start dialing. L The unit will start dialing automatically.
L To send a fax, insert the document FACE DOWN and press {Start}.
To change the way caller information is displayed Press {Caller ID} repeatedly after the caller information
is displayed.
Example: SAM LEE
11:20AM Jul. 20,
b
LA Q on the display means the item has already been viewed or answered.
Display while viewing
LWhen the unit could not receive a name, the display
will show “NO NAME RCVD”.
LWhen no calls have been received, the display will show “NO CALLER DATA”.
To edit a telephone number before calling back/storing
While displaying a desired caller information, press {*} repeatedly. Each time you press {*}, the telephone number will be changed as follows:
A 1 – Area code – Local telephone number (“1” added)*1
B Local telephone number only (area code omitted) C Area code – Local telephone number*1
D1 – Local telephone number (“1” added and area code omitted)
*1 If the received caller information does not include an area code, this pattern is not available.
LTo store the number in
3.8 Erasing caller information
3.8.1 Erasing all caller information
1Press {Menu} repeatedly to display “CALLER SETUP”.
2Press {Set}.
L “CALL LIST ERASE” will be displayed.
3Press {Set}.
LTo cancel erasing, press {Stop}, then {Menu}.
4Press {Set}.
5Press {Stop} to exit.
3.8.2 Erasing specific caller information
1Press {Caller ID}.
2Press {A} or {B} repeatedly to display the desired item.
3Press {<}.
LTo cancel erasing, press {Stop} 2 times.
4Press {Set}.
LTo erase other items, repeat steps 2 to 4.
5Press {Stop} to exit.
28