4. Fax
4.4.2Adding a new item into the broadcast memory
After initial programming, you can add new items (up to a combined total of 20).
1Press {>}.
LConfirm that there are no documents in the document entrance.
2Press {A} or {B} repeatedly to display the desired broadcast memory (“<BROADCAST1>”, “<BROADCAST2>” or “<MANUAL BROAD>”).
3Press {Menu}.
4Press {*}.
5Press {A} or {B} repeatedly to display the desired item you want to add.
6Press {Set}.
LTo add other items, repeat steps 5 and 6 (up to 20 items).
7Press {Stop} to exit.
Note:
LWhen adding new items to the MANUAL BROADCAST memory, you can only select stored items.
4.4.3Erasing a stored item from the broadcast memory
1Press {>}.
LConfirm that there are no documents in the document entrance.
2Press {A} or {B} repeatedly to display the desired broadcast memory (“<BROADCAST1>”, “<BROADCAST2>” or “<MANUAL BROAD>”).
3Press {Menu}.
4Press {#}.
5Press {A} or {B} repeatedly to display the desired item you want to erase.
L To cancel erasing, press {Stop}.
6Press {Set}.
7Press {Set}.
LTo erase other items, repeat steps 5 to 7.
8Press {Stop} to exit.
4.4.4Sending the same document to pre- programmed parties
1Insert the document FACE DOWN.
2If necessary, press {A} or {B} repeatedly to select the desired resolution (page 30).
3Press the desired {Broadcast}
LAfter transmission, the unit will automatically print a report (broadcast sending report).
Note:
LIf you select “FINE”, “SUPER FINE”, “PHOTO” or “MIXED” resolution, the number of pages that the
unit can send will decrease.
LIf the document exceeds the memory capacity, sending will be canceled.
LIf a party is busy or does not answer, it will be skipped and redialed later 1 time.
To cancel broadcast transmission
1.Press {Stop} repeatedly until “SEND CANCELED?” is displayed.
2.Press {Set}.
33