Teledyne 4060 manual Navigation and Data Entry, Enter

Series 4060 Operation

	particular key it will be typed as
	text using all caps. Example: this is
	the ENTER key.
Screen Modes:	Times New Roman 12 pt. italic.
	Example: Analysis Mode or Setup
	Mode.
Screen Readout:	Arial Narrow, 12 pt bold.
	Example: AUTOCAL.

4.6.3 Navigation and Data Entry

Note: All menus time out after 15 (fifteen) seconds elapse with no button presses, the analyzer returns to the ANALYSIS SCREEN, if parameters have been altered but not saved (with the ENTER key), the alterations are lost.

Navigation and Data Entry is possible using 2 ARROW KEYS, the ENTER key, and the ESCAPE key. It is important to read and understand the MENU STRUCTURE section to fully understand navigation and data entry.

4.6.3.1ARROW KEYS

Pressing the ARROW KEYS select menus and modifies values.

1.In the ANALYSIS SCREEN, the ARROW KEYS cause entry into the MAIN MENU.

2.When the selected option is a function on the MAIN MENU or any SUB MENU screen, the ARROW KEYS move to the next lower or upper menu.

3.If the selected option is a MODIFIABLE ITEM (value is flashing), The ARROW KEYS increment or decrement numeric values or toggle ON/OFF, YES/NO, or ENABLE/DISABLE type values.

4.The arrow keys, when pressed simultaneously, are used to manually ignite the flame after a flame-out condition.

4.6.3.2ENTER

The ENTER key is used in several context-sensitive ways.

Teledyne Analytical Instruments 47